저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Kingston Technology Corp.

Kingston Technology Corp. SEDC3000ME/30T7 30.72TB enterprise SSD

SKU CH-7Y7Z-FW12D MPN SEDC3000ME/30T7

30.72 TB U.2 NVMe enterprise SSD with PCIe 5.0 x4 interface and TCG Opal security

  • Massive 30.72TB capacity fits huge datasets
  • PCIe 5.0 x4 NVMe delivers 2,600,000 IOPS reads
  • U.2 2.5" 15mm form factor suits dense servers
  • 99% QoS latency under 175µs read
  • 3D eTLC NAND with wear leveling extends endurance

Enterprise U.2 SSD for heavy write workloads

The Kingston SEDC3000ME/30T7 is a 30.72TB enterprise solid-state drive built in a 2.5-inch U.2 form factor measuring 15mm in height. It connects through a PCIe 5.0 x4 NVMe interface that remains backward-compatible with Gen4 platforms. This drive targets data-centre operators who need sustained throughput for mixed read and write workloads.

Replaces lower-capacity or Gen4 enterprise drives

Moving from a smaller enterprise SSD or a previous-generation PCIe 4.0 device adds both capacity and bandwidth headroom in a single slot. The jump is worth it when applications demand consistent low latency at high queue depths and the platform can supply a U.2 bay with PCIe 5.0 signalling.

30.72TB capacity with QoS latency guarantees

The 3D eTLC NAND delivers sequential speeds of 2,600,000 read and 350,000 write IOPS with matching random performance. Quality of service at the 99th percentile stays below 175 microseconds for reads and 12 microseconds for writes. Static and dynamic wear levelling extends endurance across the full 30.72TB address space.

주요 특징

  • Massive 30.72TB capacity fits huge datasets
  • PCIe 5.0 x4 NVMe delivers 2,600,000 IOPS reads
  • U.2 2.5" 15mm form factor suits dense servers
  • 99% QoS latency under 175µs read
  • 3D eTLC NAND with wear leveling extends endurance

사양

이 상품에 대해 아직 공개된 사양이 없습니다.

이 상품에 대한 질문

What U.2 slot height does the 15mm drive need?

The drive uses the standard U.2 2.5-inch form factor with a 15mm z-height, so the server bay or carrier must accept 15mm-thick drives.

Which PCIe generation should the backplane or riser support for full Gen5 x4 speed?

Install the drive in a PCIe 5.0 x4 NVMe slot; it will negotiate Gen5 automatically, but the common mistake is using a Gen4-only backplane which caps throughput.

When should the 30.72TB drive be replaced based on wear-leveling health data?

Monitor SMART wear-leveling attributes; replace the drive once the media-wear indicator approaches the rated endurance limit for 30.72TB of 3D eTLC NAND.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.