Lian Li O11DERGBW White ATX Mid Tower PC Case
- ATX / Micro ATX Mid…
- White
Lian Li
An ATX mid-tower with dual tempered-glass panels, room for E-ATX boards under 280 mm, ten fan mounts, top 420 mm radiator support, and a reversible layout
Options Black
The Lian Li O11 Dynamic EVO RGB is an ATX mid-tower case built from steel, aluminium and tempered glass. It targets builders who want a showcase chassis with dual ARGB light strips on the top and bottom edges. The reversible layout and adjustable motherboard tray give flexibility for custom-loop or air-cooled configurations.
Verify that your motherboard fits the E-ATX limit of 280 mm width and that your graphics card does not exceed 455.7 mm in length. CPU coolers must stay within 167 mm height and the power supply must be an ATX unit shorter than 220 mm. Drive cages accept two 3.5-inch or 2.5-inch drives plus additional 2.5-inch mounts behind the motherboard tray.
The case supports up to ten fans in 120 mm or 140 mm sizes across side, bottom, rear and top positions. Radiator mounts allow 360 mm, 280 mm or 240 mm units on the side and bottom, and a 420 mm unit on the top. No fans are pre-installed, so airflow and noise depend entirely on the cooling hardware you choose.
| Brand | LIAN LI |
|---|---|
| Model | O11DERGBX |
| Type | ATX / Micro ATX Mid Tower |
| Color | Black |
| Case Material | Steel, Aluminum, Tempered glass |
| With Power Supply | No |
| Motherboard Compatibility | EATX(under 280mm)/ATX/MICRO-ATX/MINI-ITX |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Dust Filters | 1 x Bottom |
| Internal 3.5" Drive Bays | Hard Drive Cage: 2 X 3.5" HDD or 2.5" SSD Side fan Bracket: 2 X 3.5" HDD or 4x 2.5" SSD |
| Internal 2.5" Drive Bays | Behind MB Tray: 2 X 2.5" SSD |
| Front Ports | 2 x USB 3.0, 1 x Audio, 3 x Buttons |
| Fan Options | Side: 120mm x3 / 140mm x3 Bottom: 120mm x3/ 140mm x3 Rear: 120 mm x1 Top: 120mm x3 / 140mm x3 |
| Pre-installed Fans | No Fan Installed |
| Radiator Options | Side: 360 / 280 /240 Bottom: 360 / 280 /240 Top: 360/ 420 /240 |
| Max GPU Length | 455.7 mm(Max) |
| Max CPU Cooler Height | 167 mm(Max) |
| Max PSU Length | ATX(under 220 mm) |
| Dimensions | 18.82" x 11.42" x 18.54" |
| Weight | 37.92 lbs. |
| 배송 무게 | 17.15 kg |
| 포장 크기 | 610 × 541 × 386 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The case ships with dual ARGB light strips installed along the top and bottom, tempered glass side panels and a single bottom dust filter. No fans are pre-installed so you will need to purchase up to ten 120 mm or 140 mm fans for the side, bottom, top and rear mounts.
The chassis accepts E-ATX up to 280 mm wide, ATX, Micro-ATX and Mini-ITX boards. The reversible design lets you move the I/O module to three different positions without tools, so you can orient the build for either traditional or rotated airflow while keeping the same motherboard support.
You can mount a 420 mm radiator in the roof alongside three 140 mm fans, while the side and bottom each accept up to 360 mm radiators. This gives enough surface area for a high-wattage CPU and GPU on a single loop without exceeding the 167 mm CPU cooler height or 455.7 mm GPU length limits.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?