저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Small rectangular 1.54 inch e-ink screen showing red black white pixels on a green circuit board with gold pins

LORDWORLD

LORDWORLD 1.54inch 200x200 Three-Color E-Ink Display Module (B)

SKU CH-4HSZ-M3ECE

A 1.54 inch E-Ink screen shows red, black and white at 200x200 resolution over SPI with an onboard 3.3V/5V level shifter and keeps its image without power

  • Three-colour E-Ink shows red, black and white
  • 200×200 resolution on a 1.54 inch screen
  • SPI interface connects to Raspberry Pi, Arduino or STM32
  • Onboard voltage translator handles 3.3 V and 5 V logic
  • Ultra-low power, only draws current during refresh

Compact E-Ink Module for Embedded Projects

The LORDWORLD 1.54inch display provides a 200x200 resolution screen with red, black and white three-colour output. It connects through an SPI interface and includes an onboard voltage translator for 3.3V or 5V logic compatibility. Development resources and manuals with examples for Raspberry Pi and STM32 platforms are supplied. This module suits makers adding persistent, low-power visual feedback to IoT edge devices.

Passive Display With Near-Zero Static Draw

No backlight is fitted so the panel retains the last image indefinitely without power. Energy is consumed only during a refresh cycle, making it suitable for battery-operated nodes that update infrequently. The embedded controller handles the driving waveforms, leaving the host MCU free for other tasks. Silent operation is inherent with no moving parts or fan requirement.

SPI Peripheral That Fits Tight Spaces

The board mounts directly to a controller via its SPI pins, needing no extra driver circuitry thanks to the integrated level shifter. Its small 1.54inch outline leaves room for sensors, radios or additional modules in a compact enclosure. Builders who need a larger viewing area, higher pixel density, or a parallel interface will have to select a different panel. The included example code accelerates integration with popular Raspberry Pi and STM32 development boards.

주요 특징

  • Three-colour E-Ink shows red, black and white
  • 200×200 resolution on a 1.54 inch screen
  • SPI interface connects to Raspberry Pi, Arduino or STM32
  • Onboard voltage translator handles 3.3 V and 5 V logic
  • Ultra-low power, only draws current during refresh

사양

BrandLORDWORLD

이 상품에 대한 질문

How do I wire the SPI pins to a Raspberry Pi and which step is often missed?

Connect the module's SPI lines to the Pi's hardware SPI port and enable the SPI interface in raspi-config; the step many skip is enabling SPI before running the example code.

What part will need replacement first if I refresh the screen frequently?

The E-Ink panel itself wears out after many full refresh cycles, so the display module is the component that will eventually need replacing.

What limit appears first during continuous updating?

The full-refresh cycle time and the panel's rated refresh count are the first limits you hit when updating the 200x200 three-colour display repeatedly.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.