저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
LORDWORLD 1TB NVMe SSD with graphene heatsink and aluminum USB 3.2 Gen 2 enclosure

LORDWORLD

LORDWORLD 1TB NVMe SSD 7400MB/s Gen 4.0 + USB 3.2 Gen 2 10Gbps Enclosure

SKU CH-PAXX-KDTX4

Bundles a 1 TB PCIe 4.0 NVMe SSD reaching 7400 MB/s with a tool-free USB 3.2 Gen 2 10 Gbps enclosure that also accepts 2242, 2260 and 2280 SATA drives

  • 1TB NVMe SSD with up to 7400MB/s sequential speed
  • PCIe Gen 4.0 x4 interface for fast internal performance
  • Graphene heatsink included to manage drive temperature
  • Tool-free aluminum enclosure supports USB 3.2 Gen 2 10Gbps
  • Enclosure fits 2242, 2260 and 2280 M.2 drives

1TB NVMe SSD with Gen 4.0 x4 interface

This bundle pairs a 1TB PCIe Gen 4.0 x4 NVMe 2.0 SSD rated for up to 7400MB/s with a tool-free aluminum enclosure. The drive includes a graphene heatsink and supports DRAM-less operation, Trim and low power consumption. The enclosure connects via USB 3.2 Gen 2 at 10Gbps and accepts M-Key or B+M Key SSDs in 2242, 2260 and 2280 form factors.

Check motherboard slot and enclosure compatibility

Verify your motherboard provides an M.2 slot wired for PCIe Gen 4.0 x4 NVMe to use the drive internally at full speed. For external use, confirm your host port supports USB 3.2 Gen 2 10Gbps and supplies enough bus power for the SSD and enclosure. The enclosure accepts only M-Key or B+M Key NVMe and SATA drives in the listed lengths; other keying or sizes will not fit.

Thermals noise and power in normal use

The SSD’s graphene heatsink and DRAM-less design keep power draw low during typical workloads. The aluminum enclosure acts as a passive heat spreader for the drive when used externally. With no moving parts in either component, operation is silent under normal read and write activity.

주요 특징

  • 1TB NVMe SSD with up to 7400MB/s sequential speed
  • PCIe Gen 4.0 x4 interface for fast internal performance
  • Graphene heatsink included to manage drive temperature
  • Tool-free aluminum enclosure supports USB 3.2 Gen 2 10Gbps
  • Enclosure fits 2242, 2260 and 2280 M.2 drives

사양

BrandLORDWORLD

이 상품에 대한 질문

Does the bundle include both the 1TB NVMe SSD and the aluminum enclosure, or must the enclosure be bought separately?

The bundle supplies the 1TB PCIe Gen 4.0 x4 M.2 2280 NVMe SSD with a graphene heatsink and the tool-free aluminum M.2 to USB 3.2 Gen 2 10Gbps enclosure together in one package.

Should I choose the 1TB drive with the Gen 4.0 enclosure or look for a different capacity?

Only the 1TB model is offered in this bundle; the drive delivers up to 7400MB/s sequential speed on a PCIe Gen 4.0 x4 slot and the enclosure supports M.2 2242, 2260 and 2280 NVMe or SATA SSDs.

What does the 7400MB/s figure mean when the SSD is used inside the USB enclosure?

The 7400MB/s rating applies to the internal PCIe Gen 4.0 x4 connection; through the USB 3.2 Gen 2 10Gbps enclosure the practical ceiling is the USB link, so real-world transfers will be limited to roughly 10Gbps bandwidth.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.