저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Small circuit board with 83cm waterproof probe cable and 3-pin connector

LORDWORLD

LORDWORLD Analog TDS Meter Sensor Kit 83cm Probe 0-1000ppm ±10% development board

SKU CH-6YP3-P6AGX

Measures total dissolved solids from 0 to 1000 ppm with ±10% accuracy using an 83 cm waterproof probe and Gravity 3-pin interface

  • Accurate TDS readings from 0 to 1000 ppm with ±10% precision
  • 83 cm waterproof probe enables long-term immersion for continuous monitoring
  • AC excitation prevents polarisation, extending probe life and stabilising output
  • Gravity 3-pin plug-and-play interface works without soldering
  • Wide 3.3 to 5.5 V input and 0 to 2.3 V output suit 3.3 V or 5 V boards

TDS sensor kit for Arduino projects

This LORDWORLD kit measures total dissolved solids from 0 to 1000ppm with ±10% accuracy for hydroponics, aquarium and drinking-water monitoring. The package includes an 83cm waterproof probe and a Gravity signal board that plugs directly into a development board without soldering. Sample code is provided to start data logging immediately. Makers who need continuous immersion readings will find the AC-excitation design reduces polarisation drift over time.

Gravity 3-pin interface and AC-excited probe

The probe tip and cable are fully waterproof for long-term submersion while the connector and converter board must stay dry. A Gravity 3-pin cable carries power and the 0 to 2.3V analogue output to the host board. The excitation source uses an AC signal to prevent electrode polarisation, extending probe life and keeping output stable during extended deployments. Builders should route the cable so the board remains above any splash zone.

Check voltage and mounting before ordering

The sensor operates from a 3.3 to 5.5V supply, so confirm your microcontroller matches this range. Only the probe and its cable tolerate water; the signal board and 3-pin plug are not waterproof and need a dry enclosure. The analogue output tops out at 2.3V, so verify your ADC reference can resolve that span. Users who require a fully sealed transmitter or wireless link will need a different solution.

주요 특징

  • Accurate TDS readings from 0 to 1000 ppm with ±10% precision
  • 83 cm waterproof probe enables long-term immersion for continuous monitoring
  • AC excitation prevents polarisation, extending probe life and stabilising output
  • Gravity 3-pin plug-and-play interface works without soldering
  • Wide 3.3 to 5.5 V input and 0 to 2.3 V output suit 3.3 V or 5 V boards

사양

BrandLORDWORLD

이 상품에 대한 질문

What analog voltage range does the Gravity 3-pin interface output, and what TDS ceiling does it represent?

The sensor outputs 0 to 2.3 V, corresponding to a 0-1000 ppm measurement range with ±10% accuracy.

How long is the waterproof probe cable, and which parts must stay dry?

The probe cable is 83 cm long; the tip and cable are submersible, but the connector and signal board are not waterproof.

What supply voltage does the board accept, and what common wiring mistake causes bad readings?

It accepts 3.3 to 5.5 V; reversing the Gravity 3-pin plug or powering the board before the probe is immersed gives erratic values.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.