저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
LORDWORLD PoE HAT board with GPIO header cooling fan and USB-A port

LORDWORLD

LORDWORLD Power Over Ethernet HAT Type C development board 802.3

SKU CH-9M42-3BHSC

Adds PoE power and active cooling to Raspberry Pi 3B+ or 4B via a 40-pin GPIO header, plus a USB-A port for extra devices

  • Powers Raspberry Pi 3B+/4B via 802.3af/at PoE networks
  • Fully isolated SMPS delivers stable 12V 2A and 5V 4A output
  • Onboard high-speed fan actively cools the board under load
  • Extra USB-A port powers additional external devices
  • Standard 40-pin GPIO header ensures direct Pi compatibility

PoE HAT for Raspberry Pi 3B+ and 4B

This add-on board equips a Raspberry Pi 3B+ or 4B with Power over Ethernet capability. It connects through the standard 40-pin GPIO header and draws power from an 802.3af or 802.3at compliant source. The board suits makers who want a single cable for both data and power in embedded or edge projects.

Isolated SMPS with active cooling fan

A fully isolated switched-mode power supply converts the PoE input into stable 12 V 2 A and 5 V 4 A rails for the Pi. An onboard high-speed fan provides active cooling to keep temperatures low during sustained loads. The isolated design helps protect the host board from voltage spikes on the Ethernet line.

Extra USB-A port for peripheral power

While the HAT powers the Raspberry Pi, its USB-A port can simultaneously supply an external device such as a sensor hub or small display. This reduces the need for additional power adapters in compact builds. Buyers who need PoE without extra USB power output or who require a passive cooling solution should consider alternative boards.

주요 특징

  • Powers Raspberry Pi 3B+/4B via 802.3af/at PoE networks
  • Fully isolated SMPS delivers stable 12V 2A and 5V 4A output
  • Onboard high-speed fan actively cools the board under load
  • Extra USB-A port powers additional external devices
  • Standard 40-pin GPIO header ensures direct Pi compatibility

사양

BrandLORDWORLD

이 상품에 대한 질문

How do I install the LORDWORLD PoE HAT on a Raspberry Pi 3B+ or 4B, and what step is often missed?

Align the 40PIN GPIO header and press firmly until fully seated; the step often missed is ensuring the PoE switch or injector is IEEE 802.3af/at compliant before powering on.

What maintenance or replacement will the onboard fan need later?

The high-speed active cooling fan may collect dust over time; clean it periodically with compressed air and replace it if bearing noise appears or airflow drops.

What limit appears first when the board runs at sustained 12V 2A and 5V 4A output?

Thermal limits appear first; the isolated SMPS and fan manage heat, but continuous maximum load can trigger throttling if enclosure airflow is restricted.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.