LORDWORLD
LORDWORLD USB 3.1 to USB 3.0 20Pin Header Adapter 2pcs
Converts a motherboard USB 3.0 20-pin header to a USB 3.1 front-panel socket, two adapters included
- Converts a motherboard USB 3.0 header to a USB 3.1 front-panel socket
- Vertical USB 3.0 socket mates cleanly with standard 20-pin header
- Vertical USB 3.1 header fits modern front-panel connectors
- Two adapters included for dual-port or multi-build use
- Direct header-to-header design needs no extra cables or power
USB 3.1 Header Adapter
This two-piece adapter set converts an available motherboard USB 3.0 20-pin header into a USB 3.1 front-panel header. Each unit features a vertical USB 3.0 front-panel socket on one end and a vertical USB 3.1 front-panel header on the other. The parts are new and intended for internal case wiring.
Check Motherboard Header
Verify that your motherboard provides a spare USB 3.0 20-pin header before ordering. The adapter requires this specific connector type to function as a converter. Ensure the vertical orientation matches your chassis front-panel layout and that cable routing allows the extension to reach without strain.
Upgrade Front Panel USB
This adapter upgrades a legacy USB 3.0 header to the newer 3.1 standard for front-panel ports. The jump is worthwhile when a case or accessory demands a USB 3.1 header but the board only offers 3.0. It does not add headers where none exist and cannot convert USB 2.0 connectors.
주요 특징
- Converts a motherboard USB 3.0 header to a USB 3.1 front-panel socket
- Vertical USB 3.0 socket mates cleanly with standard 20-pin header
- Vertical USB 3.1 header fits modern front-panel connectors
- Two adapters included for dual-port or multi-build use
- Direct header-to-header design needs no extra cables or power
사양
| Brand | LORDWORLD |
|---|
이 상품에 대한 질문
Does the pack contain anything besides the two adapters?
The package includes two adapters, each with a vertical USB 3.0 front panel socket on one end and a vertical USB 3.1 front panel header on the other.
When would I choose this 20-pin adapter over a different header type?
Choose this adapter when your motherboard has a USB 3.0 20-pin header but your case front panel uses a USB 3.1 key-A type-E connector.
Will my front-panel ports run at USB 3.1 speeds after fitting this adapter?
The adapter converts the physical header from USB 3.0 to USB 3.1; actual transfer speed stays at the USB 3.0 rate supported by the motherboard header.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



