MECPOW
MECPOW M1 Mini 5W Laser Engraver 100x100mm 10000mm/min
Portable 5 W diode laser engraves and cuts over 300 materials in a fully enclosed, FDA Class 1 certified desktop unit weighing 2.4 kg
- Engrave over 300 materials with 5 W diode laser
- FDA Class 1 enclosure blocks 99 % laser light and fumes
- Pre-assembled with four-button control for instant start
- Weighs only 2.4 kg for easy desktop relocation
- Optional IR module and rotary roller expand metal and curved engraving
Compact Desktop Laser Engraver
The MECPOW M1 Mini is a pre-assembled desktop laser engraver with a 100x100mm work area and a maximum engraving speed of 10000 mm/min. It uses a 5W diode laser module capable of cutting 3mm plywood and 5mm pine, while an optional 1.2W IR module extends compatibility to most metals. Accuracy reaches 0.01 mm for detailed results across 300+ materials.
Safe Choice for Beginners and Hobbyists
The fully enclosed FDA Class 1 design blocks 99% of laser light and fumes, removing the need for protective goggles during operation. A lid auto-stop function halts the machine when opened, protecting users, children and pets. Four simple buttons and preloaded material presets let new users start engraving immediately without complex setup.
Check Compatibility and Space Before Buying
Verify that your intended materials fall within the supported 300+ range, as the 5W module cannot process every substrate without the optional IR upgrade. Ensure you have a stable desktop surface for the 2.4kg unit and consider ventilation or the separately sold fume extractor that filters 99.97% of smoke. Confirm any curved objects require the compatible rotary roller accessories.
주요 특징
- Engrave over 300 materials with 5 W diode laser
- FDA Class 1 enclosure blocks 99 % laser light and fumes
- Pre-assembled with four-button control for instant start
- Weighs only 2.4 kg for easy desktop relocation
- Optional IR module and rotary roller expand metal and curved engraving
사양
이 상품에 대해 아직 공개된 사양이 없습니다.
이 상품에 대한 질문
Does the Mecpow M1 Mini need a separate rotary roller to engrave cups and bottles?
The engraver works with the optional G3 Pro or G5 rotary roller for curved items such as cups and bottles; without the roller it engraves flat surfaces only.
Can the 5 W diode module cut the same 3 mm plywood when the machine runs at its 10000 mm/min top speed?
The 5 W module cuts 3 mm plywood and 5 mm pine; max speed is 10000 mm/min, so cutting thick wood will typically use a slower feed rate for clean results.
How can I confirm the 0.01 mm accuracy after I set up the Mecpow M1 Mini?
Engrave a small test grid or calibration pattern on a flat material and measure the line spacing with a precise ruler or digital caliper to verify the stated 0.01 mm accuracy.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
