저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Micron

Micron 5300 PRO MTFDDAK7T6TDS 7.68TB SATA 2.5" enterprise SSD

SKU CH-KK1Y-PEHRP

High-capacity 7.68TB enterprise SSD with 3D TLC NAND, SATA 6Gb/s interface, 540 MB/s read, 520 MB/s write, and 0.65 DWPD endurance

  • Form Factor2.5"
  • Capacity7.68TB
  • Memory Components3D TLC
  • InterfaceSATA
  • Sustained Sequential Read540 MB/s
  • Sustained Sequential Write520 MB/s
  • Massive 7.68TB capacity fits standard 2.5-inch bays
  • Sustained 540 MB/s read speeds accelerate data access
  • 520 MB/s sustained writes support mixed workloads
  • AES 256-bit hardware encryption with TCG Opal 2.0 secures data
  • 3,000,000-hour MTBF and 0.65 DWPD ensure enterprise reliability

7.68TB SATA enterprise SSD

The Micron 5300 PRO MTFDDAK7T6TDS is a 2.5-inch internal solid-state drive built for enterprise servers and storage arrays. It delivers 7.68TB of capacity using 3D TLC NAND and a 6Gb/s SATA interface. The drive includes AES 256-bit hardware encryption with TCG Opal 2.0 support and power-loss protection for data integrity.

Suits read-intensive server workloads

This drive fits cloud storage, virtualization, data warehousing and mixed-workload applications that benefit from high capacity and consistent latency. Its 0.65 DWPD endurance rating and 9,110 TBW make it appropriate for read-heavy tasks. Buyers who need higher write endurance for write-intensive databases or logging should consider a drive with a greater DWPD figure.

0.65 DWPD endurance rating

The single specification that decides fit is the 0.65 drive writes per day endurance over the warranty period. This value determines whether the SSD can sustain your application's daily write volume without exceeding its rated lifespan. Match this number against your workload's write profile to confirm suitability.

주요 특징

  • Massive 7.68TB capacity fits standard 2.5-inch bays
  • Sustained 540 MB/s read speeds accelerate data access
  • 520 MB/s sustained writes support mixed workloads
  • AES 256-bit hardware encryption with TCG Opal 2.0 secures data
  • 3,000,000-hour MTBF and 0.65 DWPD ensure enterprise reliability

사양

BrandMicron
Series5300 PRO
ModelMTFDDAK7T6TDS
Part Number1AW1ZABYY
Form Factor2.5"
Capacity7.68TB
Memory Components3D TLC
InterfaceSATA
Sustained Sequential Read540 MB/s
Sustained Sequential Write520 MB/s
Endurance0.65 DWPD
MTBF3,000,000 hours
FeaturesAES 256-bit hardware encryption, TCG Opal 2.0, Instant Secure

이 상품에 대한 질문

Will the 2.5" SATA 6Gb/s interface and 7.68TB capacity work in a server that currently runs older SATA 3Gb/s SSDs?

Yes, the SATA 6Gb/s interface is backward compatible with 3Gb/s controllers. The drive will operate at the slower link speed while delivering its full 7.68TB capacity and 0.65 DWPD endurance.

How can I verify the AES 256-bit encryption and TCG Opal 2.0 features are active after installation?

Use a TCG Opal-compatible management tool or your RAID controller BIOS to confirm the encryption status and lock state. The drive also reports 1,379 power-on hours and health data via SMART.

Does the 2.5" enterprise SSD ship with a mounting bracket, caddy or SATA cables, or must they be purchased separately?

The drive is supplied as a bare 2.5" unit. Mounting brackets, drive caddies and SATA data or power cables are not included and must be sourced separately for your server chassis.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.