Montech
Montech BETA 2 550W power supply
Delivers 550 W through an ATX 3.1 ready design with 80 Plus Bronze efficiency and Japanese main capacitor
- ColorBronze
- TypeATX
- Maximum Power550 W
- Fans1 x 120 mm
- Energy-Efficient80 PLUS BRONZE Certified
- ProtectionOPP, OVP, UVP, OCP, OTP, SCP
- ATX 3.1 readiness handles 200% total and 300% GPU power spikes
- DC-to-DC topology delivers independent rails for cleaner voltage regulation
- Japanese main capacitor resists heat and suppresses ripple for longer life
- 80 Plus Bronze certification reaches over 85% efficiency at typical loads
- Six protection circuits — OPP, OVP, UVP, OCP, OTP, SCP — guard every rail
550 W ATX 3.1-ready PSU
The Montech BETA 2 550W is an ATX power supply rated for 550 W continuous output. It meets the ATX 3.1 specification and can handle 200 % total system peak wattage plus 300 % GPU power excursions. A single 120 mm fan provides cooling while the unit carries 80 PLUS Bronze certification for over 85 % typical-load efficiency.
Builders needing two CPU and two GPU connectors
This unit suits systems that require one 20+4-pin motherboard connector, two 4+4-pin CPU connectors and two 6+2-pin PCIe connectors. It also supplies four SATA and four Molex 4-pin leads. Builds that demand more than two PCIe power cables or a higher continuous wattage rating should look at a larger model.
Case depth and cable routing before ordering
The housing measures 140 x 150 x 86 mm, so confirm that your chassis can accommodate that length and width. Check that the fixed cable set reaches all component positions without strain. Verify that your motherboard uses a standard 20+4-pin socket and that the two 4+4-pin CPU headers match your board layout.
주요 특징
- ATX 3.1 readiness handles 200% total and 300% GPU power spikes
- DC-to-DC topology delivers independent rails for cleaner voltage regulation
- Japanese main capacitor resists heat and suppresses ripple for longer life
- 80 Plus Bronze certification reaches over 85% efficiency at typical loads
- Six protection circuits — OPP, OVP, UVP, OCP, OTP, SCP — guard every rail
사양
| Brand | Montech |
|---|---|
| Model | BETA 2 550W |
| Part Number | BETA 2 550W |
| Color | Bronze |
| Type | ATX |
| Maximum Power | 550 W |
| Fans | 1 x 120 mm |
| Energy-Efficient | 80 PLUS BRONZE Certified |
| Protection | OPP, OVP, UVP, OCP, OTP, SCP |
| Connectors | M/B 20+4Pin: 1 (20+4 Pins) CPU 4+4Pin: 2 (4+4 Pins) PCIE 6+2: 2 (6+2 Pins) SATA: 4 Molex 4Pin: 4 |
| Dimensions | 140 x 150 x 86mm |
| 배송 무게 | 1.77 kg |
| 포장 크기 | 254 × 201 × 100 mm |
이 모델의 다른 버전
같은 라인업에서 3개 더
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
이 상품에 대한 질문
Does my motherboard need a 20+4 pin ATX socket and two 4+4 pin CPU sockets to use this 550 W unit?
Yes, the PSU includes one 20+4 pin motherboard connector and two 4+4 pin CPU connectors, so your board must provide matching sockets.
Can I keep an older graphics card that only needs a single 6-pin power connector with this supply?
The unit ships with two 6+2 pin PCIe cables; each can serve a 6-pin plug by leaving the extra 2 pins unused.
How can I verify the PSU is delivering stable power after installation?
The built-in OPP, OVP, UVP, OCP, OTP and SCP protections will shut the unit down if voltages drift out of spec, so a successful boot and sustained load confirm correct operation.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Wadermoon PCI-E 1X to 4 PCI-E USB 3.0 expansion card
- PCI Express to USB…
- 4 Port
Orico PE20-1C 20 Gbps USB 3.2 Gen 2x2 Type-C PCIe x4 expansion card
- PCI Express to USB…
- 1x USB Port
OWC 16GB DDR4 2666MHz CL19 ECC SODIMM 1.2V laptop RAM
- 16GB (1 x 16GB)
- 260-Pin DDR4 SO-DIMM






