EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
MSI
A refurbished GeForce RTX 3070 with 8 GB GDDR6 memory, 5888 CUDA cores and a 1755 MHz boost clock, limited to a 25 MH/s Ethereum hash rate
The MSI RTX 3070 Ventus 2X 8G OC LHR targets players and creators who want strong frame rates at 1440p. Eight gigabytes of GDDR6 memory on a 256-bit bus feed 5888 CUDA cores clocked to 1755 MHz. A PCI Express 4.0 x16 link keeps data moving to modern platforms. The card carries a lite hash rate limiter that caps Ethereum mining at roughly 25 MH/s.
Two TORX Fan 3.0 units push high static pressure across a heatsink fed by precision core pipes that contact the GPU directly. The 220 W thermal design means the dual-fan array can sustain boost clocks through extended loads without the noise spikes seen on smaller coolers. Afterburner and OC Scanner let you tune voltage and frequency curves if you want extra headroom.
A 650 W supply with two 8-pin connectors is the minimum recommended. Measure your case length and height clearance against a dual-slot, dual-fan board before ordering. Verify your monitor uses HDMI 2.1 or DisplayPort 1.4a to reach 7680 x 4320 at high refresh. Multi-GPU support is present but requires a compatible motherboard and bridge.
| Brand | MSI |
|---|---|
| Series | Ventus |
| Model | RTX 3070 Ventus 2X 8G OC LHR |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3070 |
| Core Clock | 1755 MHz |
| CUDA Cores | 5888 |
| Effective Memory Clock | 14 Gbps |
| Memory Size | 8GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1 |
| DisplayPort | 3 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 |
| Virtual Reality Ready | Yes |
| Cooler | Double Fans |
| Thermal Design Power | 220W |
| Recommended PSU Wattage | 650W |
| Power Connector | 2 x 8-Pin |
| HDCP Ready | Yes |
| Features | Dual Fan Thermal Design TORX Fan 3.0: The award-winning MSI TORX Fan 3.0 design creates high static pressure and pushes the limits of thermal performance. Core Pipe: Precision-crafted heat pipes ensure max contact to the GPU and spread heat along the full length of the heatsink. Afterburner Overclocking Utility Supports multi-GPU setups. OC Scanner: An automated function finds the highest stable overclock settings. On Screen Display: Provides real-time information of your system's performance. Predator: In-game video recording. MSI Center The exclusive MSI Center software lets you mo |
| Max GPU Length | 232 mm |
| Card Dimensions (L x H) | 9.13" x 4.88" |
| 배송 무게 | 1.25 kg |
| 포장 크기 | 345 × 265 × 80 mm |
The TORX Fan 3.0 design and core heat pipes are built to move heat off the GPU efficiently at the 220 W thermal design power, keeping temperatures in check during sustained loads.
No, the card requires two 8-pin power connectors and a 650 W supply, so you need a PSU with two dedicated PCIe 8-pin cables.
Yes, the RTX 3070 Ventus 2X is backward compatible with PCIe 3.0 x16 slots; it will run at 3.0 speeds without any extra setup.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?