SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501542BTC
재고 있음
MSI
MSI RTX 4090 SUPRIM LIQUID 24G graphics card
A liquid-cooled GPU with 24 GB GDDR6X on a 384-bit bus, 16384 CUDA cores and a 2595 MHz boost clock for 4K and 8K workloads
- InterfacePCI Express 4.0
- Chipset ManufacturerNVIDIA
- GPU SeriesNVIDIA GeForce RTX 40 Series
- GPUGeForce RTX 4090
- Boost Clock2595 MHz
- CUDA Cores16384
- 24 GB GDDR6X memory handles massive textures and datasets
- 16384 CUDA cores accelerate rendering and compute workloads
- Boost clock reaches 2595 MHz for high frame rates
- Liquid cooler keeps the 450 W GPU at lower temperatures
- HDMI 2.1a and three DisplayPort 1.4a drive four 8K displays
Liquid-cooled flagship for 4K creators
The MSI RTX 4090 SUPRIM LIQUID 24G is a PCI Express 4.0 graphics card built around the GeForce RTX 4090 GPU with 16384 CUDA cores and 24GB of 384-bit GDDR6X memory. It targets professionals and enthusiasts who need sustained compute throughput for rendering, simulation or high-refresh 4K gaming. A factory boost clock of 2595 MHz and 21 Gbps memory speed deliver the raw bandwidth those workloads demand.
Sustained load behaviour with liquid cooling
The integrated liquid cooler moves heat away from the GPU die continuously, allowing the card to hold its 2595 MHz boost clock through extended rendering or compute sessions rather than throttling after a short burst. The 450W thermal design power is fed by a single 16-pin connector, so power delivery remains stable when every CUDA core is active for hours. Frame pacing stays consistent because temperatures do not climb into the throttling zone.
Thermals noise and power in normal use
Under typical gaming or creative loads the liquid loop keeps the GPU well below its thermal limit, so the radiator fans can spin at low RPM and remain quiet. The 850W recommended PSU provides headroom for the 450W board power plus system overhead. HDMI 2.1a and three DisplayPort 1.4a outputs drive up to four displays at 7680 x 4320 resolution without requiring additional adapters.
주요 특징
- 24 GB GDDR6X memory handles massive textures and datasets
- 16384 CUDA cores accelerate rendering and compute workloads
- Boost clock reaches 2595 MHz for high frame rates
- Liquid cooler keeps the 450 W GPU at lower temperatures
- HDMI 2.1a and three DisplayPort 1.4a drive four 8K displays
사양
| Brand | MSI |
|---|---|
| Series | Suprim |
| Model | RTX 4090 SUPRIM LIQUID 24G |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 40 Series |
| GPU | GeForce RTX 4090 |
| Boost Clock | 2595 MHz |
| CUDA Cores | 16384 |
| Effective Memory Clock | 21000 MHz (21 Gbps) |
| Memory Size | 24GB |
| Memory Interface | 384-Bit |
| Memory Type | GDDR6X |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1a |
| DisplayPort | 3 x DisplayPort 1.4a |
| Color | Silver |
| Max Resolution | 7680 x 4320 |
| Cooler | Liquid Cooler |
| Thermal Design Power | 450W |
| Recommended PSU Wattage | 850W |
| Power Connector | 1 x 16-Pin |
| HDCP Ready | Yes |
| Max GPU Length | 280 mm |
| 배송 무게 | 3.82 kg |
| 포장 크기 | 447 × 273 × 179 mm |
이 상품에 대한 질문
How much power does the 450 W thermal design draw from the 16-pin connector during all-day loads?
The card has a 450 W thermal design and uses a single 16-pin power connector; an 850 W power supply is recommended to sustain continuous operation.
What power supply and case clearance do I need before installing this 280 mm liquid-cooled card?
An 850 W PSU with a native 16-pin cable is required, and the chassis must accommodate a 280 mm radiator plus the 280 mm maximum GPU length.
Will the PCI Express 4.0 interface and 1.4a DisplayPort outputs work with my older PCIe 3.0 motherboard and 1.2 monitors?
The PCIe 4.0 x16 slot is backward compatible with PCIe 3.0 at reduced bandwidth, and the three DisplayPort 1.4a ports will drive DisplayPort 1.2 displays without issue.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
