myVolts
myVolts Bobin 450W 12V Input 24Pin ATX Pico PSU
Fanless 450 W ATX pico PSU converts 12 V input through a 24-pin connector, measuring 64 × 39 × 16 mm with solid polymer capacitors
- TypeAT
- Fanless design keeps systems silent
- 450 W output from a 12 V input
- Solid polymer capacitors extend service life
- Industrial-grade capacitors resist high temperatures
- Ultra-compact 64 x 39 x 16 mm footprint
Pico PSU for ATX builds
The myVolts Bobin is a 450W pico power supply that accepts a 12V DC input and delivers power through a 24-pin ATX connector. It targets builders assembling compact or fanless systems who already have a suitable 12V external power source. Its solid polymer capacitors support high temperature resistance and long operational life.
12V DC input requirement
This unit does not connect to mains voltage; it requires an external 12V supply rated for the full 450W load. Over-current and short-circuit protection are built in, but the external brick must provide sufficient current on the 12V rail. Without a compatible 12V source the PSU cannot function.
Fits 64x39x16mm footprint
The module measures 64 by 39 by 16 millimetres and includes a power cable set, allowing installation in very small chassis where a standard ATX unit will not fit. Fanless operation eliminates moving parts and noise. Builders needing AC input or modular cabling should select a different form factor.
주요 특징
- Fanless design keeps systems silent
- 450 W output from a 12 V input
- Solid polymer capacitors extend service life
- Industrial-grade capacitors resist high temperatures
- Ultra-compact 64 x 39 x 16 mm footprint
사양
| Type | AT |
|---|
이 상품에 대한 질문
How does the 450W output hold up inside a real build?
The unit delivers 450W continuously from a 12V source, using solid polymer capacitors for stable voltage under load and long service life.
What does the 24-pin ATX connector limit in practice?
The single 24-pin ATX output supplies motherboard power only; additional peripherals need separate adapters or a different supply.
Will the 64x39x16mm board fit my ITX case?
At 64 by 39 by 16mm the module is designed for ultra-compact ITX builds and mounts directly to the 24-pin socket.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.



