EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
myVolts
DIN-rail switching power supply delivers 24V at 5A (120W) from 100–240VAC input in a compact aluminium alloy housing measuring 65.5 x 125.2 x 100 mm
The myVolts DR-120-24 is a DIN-rail mounting switching power supply that converts 100-240VAC input to a regulated 24V DC output at 5A for 120W total power. Its aluminium-alloy housing uses hollowed-out ventilation for passive cooling and includes multiple protection circuits. Mounting holes on the rear simplify installation inside control cabinets or equipment racks.
The single specification that determines compatibility is the 24V DC output at 5A delivering 120W. The unit accepts a universal 100-240VAC input at 3.3A, so it operates on mains supplies worldwide without manual voltage selection. Verify that your load requires exactly 24 volts and does not exceed five amps continuous draw before connecting.
This supply suits installers powering 24V industrial sensors, PLCs, or LED strips in DIN-rail enclosures where passive cooling and compact dimensions of 65.5 x 125.2 x 100mm are required. It is not for builders who need adjustable voltage, higher current than 5A, redundant or hot-swap capability, or a supply certified for hazardous-location installation.
| Type | AT |
|---|
At 24 V output the unit can deliver up to 5 A, giving a maximum of 120 W for industrial equipment or LED arrays.
It auto-ranges from 100 VAC to 240 VAC at 3.3 A input, so it works on global mains without a selector switch.
The housing measures 65.5 mm wide, 125.2 mm tall and 100 mm deep, fitting a standard DIN rail with rear mounting holes.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?