SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501272BTC
재고 있음
myVolts
myVolts S-50-12 12V 4.2A 50W power supply
A 12 V 4.2 A switch-mode supply with short-circuit, overload and over-voltage protection, CCC, FCC and CE compliance, and an aluminium housing rated for 0 to 40 °C operation
- TypeAT
- High efficiency and low DC ripple for stable power
- Operates from 0 to 40 °C with long service life
- High insulation strength for safe operation
- 100 % full-load burn-in test ensures reliability
- circuit, overload and overvoltage protection built in
12 V 50 W industrial power supply
This 12 V 50 W switch-mode unit delivers up to 4.2 A for industrial automation, LED displays, CCTV and 3D printers. The aluminium-alloy chassis runs without a fan from 0 to 40 °C. Built-in short-circuit, overload and over-voltage protection guards connected equipment. CCC, FCC and CE marks confirm basic safety compliance.
AC 100-240 V input with adjustable output
The supply accepts worldwide mains voltages from 100 to 240 V and provides a DC 12 V output that can be trimmed via the ADJ terminal. Low DC ripple and high working efficiency suit sensitive LED strips and control boards. Natural convection cooling limits use to environments below 40 °C and 95 % non-condensing humidity. No forced-air or liquid-cooling provision is included.
Screw-terminal wiring for panel mounting
L, N and GND terminals take standard ring or fork lugs; the V+ and ADJ terminals allow voltage adjustment before final tightening. The compact 85 x 58 x 33 mm footprint fits DIN-rail enclosures and tight machine cabinets. Installers must verify polarity and torque each terminal to avoid loose connections under vibration. The unit ships with no mounting brackets or DIN clips.
주요 특징
- High efficiency and low DC ripple for stable power
- Operates from 0 to 40 °C with long service life
- High insulation strength for safe operation
- 100 % full-load burn-in test ensures reliability
- circuit, overload and overvoltage protection built in
사양
| Type | AT |
|---|
이 상품에 대한 질문
Which model in the comparison table fits a 50 W load?
The S-50-12 is rated for 50 W at 12 V and 4.2 A, while the S-36-12 stops at 36 W and 3 A.
What does the 4.2 A rating mean when the unit is installed in a 3D printer or LED display?
It can deliver up to 4.2 A continuously at 12 V, so a device drawing 50 W or less will run within spec.
The AC input says 100-240 V — what voltage range does that actually cover?
It accepts any mains supply from 100 V to 240 V AC, making it usable worldwide without a separate adapter.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
