SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502358BTC
재고 있음
myVolts
myVolts Universal Regulated Switching Power Supply 12V 24V 5V
A regulated switching supply delivering 12 V, 24 V or 5 V outputs with overload, over-voltage and short-circuit protection
- TypeAT
- Universal AC input works worldwide from 110 V to 220 V
- Adjustable 12 V or 24 V output covers multiple project voltages
- Built-in overload, over-voltage and short-circuit protection prevents damage
- Low DC ripple and ±1 % tolerance deliver stable power to sensitive gear
- Free-air convection cooling runs silently with no moving parts
Universal Switching Power Supply
The myVolts regulated switching power supply delivers adjustable DC output at 12V or 24V with a five percent adjustment range. It accepts universal AC input from 110V to 220V at 47 or 63Hz and provides built-in protection against overload, overvoltage, and short circuit. The metal enclosure uses free air convection for cooling and has passed full load burn-in testing.
Replaces Basic Linear Adapters
This unit replaces simple linear transformers when tighter voltage tolerance of one percent and lower DC ripple are required. The jump is worth it for projects that need stable power under varying loads, such as CCTV systems, radio equipment, LED strips, or computer engineering prototypes. Efficiency gains and reduced operating temperature also extend service life compared to unregulated alternatives.
Suits Engineers and Installers
The supply suits installers and engineers who need a single adjustable source for multiple voltage rails in industrial automation or test bench setups. Buyers who require certified medical-grade isolation, redundant hot-swap modules, or DIN-rail mounting should look at specialised industrial ranges instead.
주요 특징
- Universal AC input works worldwide from 110 V to 220 V
- Adjustable 12 V or 24 V output covers multiple project voltages
- Built-in overload, over-voltage and short-circuit protection prevents damage
- Low DC ripple and ±1 % tolerance deliver stable power to sensitive gear
- Free-air convection cooling runs silently with no moving parts
사양
| Type | AT |
|---|
이 상품에 대한 질문
What screw-hole pattern and clearance does the metal chassis need for panel mounting?
The supply uses a metal chassis with standard mounting tabs; allow at least 10 mm clearance on all sides for free-air convection cooling.
How do I wire the AC input terminals for 110 V or 220 V mains?
Connect live and neutral to the two input terminals marked AC 110V/220V ± 20%; the unit auto-ranges across 47/63 Hz with no internal link to change.
When should I replace the unit if the DC ripple exceeds the ±1 % tolerance?
If output voltage drifts outside ±1 % or ripple rises noticeably, the 100 % burn-in tested unit has reached end of life and should be swapped.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
