SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502945BTC
재고 있음
NEMIX RAM
NEMIX RAM 1.5TB (12×128GB) DDR5 4800 CL40 ECC RDIMM THINKMATE GPX-XS8-24S4-4GPU
A 1.5TB DDR5 ECC registered server memory kit containing twelve 128GB modules running at 4800MT/s with CL40 latency for Thinkmate GPX-XS8-24S4-4GPU workstations
- Capacity1.5TB (12 x 128GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Massive 1.5 TB capacity from twelve 128 GB modules
- DDR5 4800 speed rated at PC5-38400 for high throughput
- ECC registered design detects and corrects data errors
- Low 1.1 V operation reduces server power draw
- Validated for ThinkMate GPX-XS8-24S4-4GPU workstation compatibility
High-capacity DDR5 kit for Thinkmate workstations
This 1.5 TB kit contains twelve 128 GB DDR5 modules built for the Thinkmate GPX-XS8-24S4-4GPU workstation. Each module runs at 4800 MT/s with a CAS latency of 40 and operates at 1.1 V. The registered ECC design uses 4Rx4 organisation to maintain data integrity across all channels.
Suited for memory-intensive server workloads
The kit targets IT teams who need maximum registered ECC capacity in a validated Thinkmate configuration. It is not for buyers who require unbuffered memory, non-ECC modules or lower-density sticks for consumer platforms. Systems that cannot accept 288-pin DDR5 RDIMMs or that limit total memory below 1.5 TB should look elsewhere.
Steady throughput under sustained load
Registered buffering and on-die ECC keep error rates low during continuous compute tasks such as virtualisation, rendering or large-dataset analysis. The 1.1 V operating voltage helps control thermals when all twelve slots are populated for extended periods. Modules are stress-tested at rated speed to verify stability before shipment.
주요 특징
- Massive 1.5 TB capacity from twelve 128 GB modules
- DDR5 4800 speed rated at PC5-38400 for high throughput
- ECC registered design detects and corrects data errors
- Low 1.1 V operation reduces server power draw
- Validated for ThinkMate GPX-XS8-24S4-4GPU workstation compatibility
사양
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-744K12 |
| Capacity | 1.5TB (12 x 128GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | THINKMATE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 1.5TB (12X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
이 상품에 대한 질문
Do I need a ThinkMate GPX-XS8-24S4-4GPU workstation with twelve free 288-pin DDR5 RDIMM slots to use this 1.5 TB kit?
Yes, the kit contains twelve 128 GB DDR5 4800 CL40 ECC registered modules that only fit a system with twelve matching DDR5 RDIMM slots, such as the ThinkMate GPX-XS8-24S4-4GPU.
Can I mix these 4Rx4 DDR5 4800 CL40 modules with any other DDR5 RDIMMs already installed in my ThinkMate GPX-XS8-24S4-4GPU?
Mixing is only reliable when the existing modules share the same 4800 MT/s speed, CL40 latency, 1.10 V voltage, 4Rx4 rank layout and ECC registered design; otherwise the system will down-clock or fail to boot.
How can I confirm the full 1.5 TB is recognised and running at DDR5 4800 CL40 after installation?
Enter the BIOS or run a memory utility such as dmidecode and verify that all twelve slots show 128 GB each, speed reads 4800 MT/s (PC5-38400) and CAS latency reads CL40.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
