SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00500262BTC
재고 있음
NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR5 5600 CL46 1.1V ECC RDIMM SuperMicro B13SEG memory upgrade
A 128GB registered DDR5 kit of four 32GB modules running at 5600 MT/s with CL46 latency and ECC for SuperMicro B13SEG servers
- Capacity128GB (4 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB capacity across four 32 GB modules for high-density server workloads
- DDR5 5600 speed with PC5-44800 bandwidth for fast data throughput
- ECC registered RDIMM design with CL46 latency ensures data integrity under load
- 1 V operating voltage reduces power draw in dense configurations
- Built with major OEM Samsung, Micron, Hynix chips and validated for SuperMicro B13SEG
128GB DDR5 ECC RDIMM kit for SuperMicro B13SEG
This 128GB kit contains four 32GB DDR5 5600 registered DIMMs with ECC and a CL46 latency. It runs at 1.1V and uses a 2Rx8 organisation on 288-pin modules. The memory is validated for SuperMicro B13SEG motherboards in server and workstation roles.
Sustained load behaviour with registered ECC
Registered buffering reduces electrical load on the memory controller during continuous operation. ECC corrects single-bit errors and detects multi-bit errors without halting the system. The 1.1V operating voltage helps maintain stability across long compute runs in multi-socket platforms.
Upgrade path from lower-capacity DDR5 RDIMMs
Replacing smaller DDR5 RDIMM sets with this 128GB kit adds capacity for larger datasets and virtual machine densities. The jump is worthwhile when the workload exceeds the current module count or total gigabytes supported by the board. Systems already using DDR5 5600 registered ECC can mix kits of identical specification.
주요 특징
- 128 GB capacity across four 32 GB modules for high-density server workloads
- DDR5 5600 speed with PC5-44800 bandwidth for fast data throughput
- ECC registered RDIMM design with CL46 latency ensures data integrity under load
- 1 V operating voltage reduces power draw in dense configurations
- Built with major OEM Samsung, Micron, Hynix chips and validated for SuperMicro B13SEG
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 2Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (4X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT |
이 상품에 대한 질문
How much power does each 32 GB DDR5 5600 module draw at 1.1 V under sustained load?
Each module operates at 1.10 V, the standard DDR5 voltage, so power draw stays low even when all four sticks run continuously in a SuperMicro B13SEG server.
Does the SuperMicro B13SEG motherboard need a specific BIOS revision or CPU generation to recognise this 2Rx8 registered ECC kit?
The kit is validated for the SuperMicro B13SEG platform; install the four 288-pin RDIMMs in the correct slots and the system will detect 128 GB at 5600 MT/s with ECC active.
Can I keep my existing DDR5 4800 RDIMMs and add this 5600 CL46 kit to the same B13SEG board?
Mixing speeds forces all channels to run at the lowest common rate, so the 5600 modules would drop to 4800 MT/s; for full performance use four matching 5600 sticks.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
