SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.0050176BTC
재고 있음
NEMIX RAM
NEMIX RAM 128GB DDR5 4800 CL40 4Rx4 ECC RDIMM SuperMicro memory upgrade
A 128 GB DDR5 4800 registered ECC RDIMM built for Supermicro servers with 4Rx4 organisation and 1.1 V operation
- Capacity128GB
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB capacity handles large server workloads
- DDR5 4800 speed delivers high data throughput
- CL40 CAS latency supports responsive operation
- ECC registered design protects data integrity
- 10 V voltage enables efficient power use
128GB DDR5 4800 ECC RDIMM
This 128GB DDR5 4800 CL40 registered DIMM targets Supermicro servers and workstations that require error-correcting memory. The single-module design suits administrators who need maximum capacity per slot. ECC and registered operation protect data integrity in mission-critical workloads. It runs at 1.1V for standard DDR5 power efficiency.
Capacity and headroom for dense configurations
One 128GB 4Rx4 module delivers high density, letting a board with limited slots reach large memory footprints. The DDR5 4800 speed (PC5-38400) handles virtualization, database caching and large dataset processing. CAS latency of CL40 and CL46 timings reflect registered ECC optimisation. Bandwidth runs out before capacity in heavily threaded compute tasks.
Fits Supermicro DDR5 RDIMM slots
The 288-pin DDR5 RDIMM form factor installs directly into compatible Supermicro motherboards that support registered ECC memory. No heat spreader keeps the profile low for tight server chassis. Major OEM Samsung, Micron or Hynix DRAM ensures validated compatibility. Builders needing unbuffered or non-ECC memory must choose a different module type.
주요 특징
- 128 GB capacity handles large server workloads
- DDR5 4800 speed delivers high data throughput
- CL40 CAS latency supports responsive operation
- ECC registered design protects data integrity
- 10 V voltage enables efficient power use
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-744K1 |
| Capacity | 128GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (1X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory |
이 상품에 대한 질문
Will this 128 GB DDR5 4800 CL40 4Rx4 ECC RDIMM run alongside existing DDR5 RDIMMs of different capacity in my Supermicro server?
Mixing capacities is possible on DDR5 platforms if all modules run at the same 4800 MT/s speed and 1.1 V voltage; the memory controller will train to the slowest common timing, so keep CAS latency and rank configuration consistent for best stability.
How can I confirm the module is operating at 4800 MT/s with ECC active after installation?
Enter the server BIOS or use a tool like dmidecode or IPMI to verify the reported speed shows 4800 MT/s, voltage reads 1.1 V, and ECC status is enabled for the 128 GB DIMM.
Does the package include only the single 128 GB 288-pin DDR5 RDIMM, or are any cables, brackets or thermal pads supplied?
The box contains one 128 GB 288-pin DDR5 4800 CL40 4Rx4 ECC RDIMM and nothing else; no cables, brackets or thermal pads are included.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
