SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00498556BTC
재고 있음
NEMIX RAM
NEMIX RAM 128GB DDR5 6400 PC5-51200 2Rx4 CL52 1.1V ECC RDIMM Supermicro H13SVW-N memory upgrade
A 128GB DDR5-6400 ECC Registered RDIMM built to the Supermicro H13SVW-N motherboard's exact rank, voltage and timing requirements
- Capacity128GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 128GB capacity fits dense server workloads
- DDR5 6400 speed runs at rated frequency
- Registered ECC architecture prevents silent data corruption
- 2Rx4 1.1V spec matches Supermicro H13SVW-N exactly
- CL52 latency meets controller timing requirements
Exact-match 128 GB DDR5-6400 RDIMM
This 128 GB DDR5-6400 (PC5-51200) registered ECC RDIMM is built for the Supermicro H13SVW-N motherboard. It runs at 1.10 V with CL52 latency and a 2Rx4 rank layout that the board's memory controller expects. The 288-pin module uses major OEM DRAM chips and has no heat spreader.
Straightforward server DIMM install
Power down the system, open the chassis and align the 288-pin key with the slot; the registered design means every populated slot runs at full rated speed. Common issues are ignoring the manual's population order or mixing ranks, which prevents the system from recognising the full 128 GB capacity.
For Supermicro H13SVW-N capacity upgrades
Suits administrators adding maximum registered ECC memory to this specific board within its approved population rules. Not for desktops or workstations that require unbuffered UDIMMs, nor for any system that cannot accept 2Rx4 registered DDR5 modules at 1.10 V.
주요 특징
- 128GB capacity fits dense server workloads
- DDR5 6400 speed runs at rated frequency
- Registered ECC architecture prevents silent data corruption
- 2Rx4 1.1V spec matches Supermicro H13SVW-N exactly
- CL52 latency meets controller timing requirements
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
How can I confirm the 128GB DDR5 6400 module is running at CL52 and 1.1V after installing it in my Supermicro H13SVW-N?
Enter the server BIOS or use a hardware monitoring tool such as IPMI to verify the memory speed shows 6400 MT/s, the CAS latency reads 52, and the voltage reports 1.10V for the installed RDIMM.
What does the package contain and are any extra components required for installation?
The box includes one 128GB 288-pin DDR5 ECC Registered RDIMM rated at 6400 MT/s CL52 1.1V; no additional cables, brackets, or heat spreaders are needed for the Supermicro H13SVW-N DIMM slots.
Should I choose the 2Rx4 128GB version or a different rank or capacity for the H13SVW-N?
Select the 2Rx4 128GB DDR5-6400 RDIMM when your motherboard manual lists that exact rank, voltage, and capacity combination as supported for full-speed operation in the required population order.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
