BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278067BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR5 5600 CL46 1.1V 288-pin UDIMM Kit for ASUS ProArt B850-CREATOR WiFi NEO
A 16 GB DDR5 dual-channel kit running at 5600 MT/s with CL46 timing and 1.1 V operation, validated for the ASUS ProArt B850-CREATOR WiFi NEO motherboard
- Capacity16GB (2 x 8GB)
- Type288-Pin DDR5 UDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCNo
- 16 GB dual-channel kit boosts multitasking headroom
- DDR5 5600 CL46 1.10 V runs at rated speed without tuning
- 288-pin UDIMM form factor fits the ASUS ProArt B850-CREATOR WiFi NEO exactly
- Major OEM Samsung, Micron or Hynix chips deliver tested stability
- 1Rx8 Non-ECC unbuffered design matches the board's memory-controller expectations
16GB DDR5 kit for ASUS ProArt B850-CREATOR WiFi NEO
This 16GB kit contains two 8GB DDR5-5600 UDIMM modules built to the exact specifications required by the ASUS ProArt B850-CREATOR WiFi NEO motherboard. The 1Rx8 rank structure, 1.1V operating voltage, and CL46 latency match the board's memory controller expectations for immediate recognition at rated speed. It is intended for users upgrading or repairing this specific desktop platform.
Practical limits of DDR5-5600 UDIMM
DDR5-5600 represents the baseline JEDEC speed for this generation; the modules will not exceed 5600 MT/s without manual overclocking, which this unbuffered non-ECC kit does not officially support. The 288-pin UDIMM form factor fits only desktop DDR5 slots and cannot be used in laptops or servers requiring SODIMM or registered DIMMs. Buyers needing ECC error correction or higher factory speeds must select a different product.
CL46 latency at 1.1V
The CL46 CAS latency at the standard 1.1V voltage is the critical timing parameter that determines compatibility with the ASUS ProArt B850-CREATOR WiFi NEO memory controller. If your motherboard manual lists a different required latency or voltage for 5600 MT/s operation, this kit will not perform as specified. Verify the supported DIMM population rules in your manual before purchase.
주요 특징
- 16 GB dual-channel kit boosts multitasking headroom
- DDR5 5600 CL46 1.10 V runs at rated speed without tuning
- 288-pin UDIMM form factor fits the ASUS ProArt B850-CREATOR WiFi NEO exactly
- Major OEM Samsung, Micron or Hynix chips deliver tested stability
- 1Rx8 Non-ECC unbuffered design matches the board's memory-controller expectations
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | ASUS |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB 2X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
이 상품에 대한 질문
Should I choose the 16GB (2x8GB) kit or look for a different capacity for my ASUS ProArt B850-CREATOR WiFi NEO?
This exact-match 16GB kit uses two 8GB DDR5-5600 modules at CL46 and 1.1V, the precise rank and voltage the board expects for full-capacity recognition and rated speed.
What does the DDR5-5600 (PC5-44800) rating mean once the modules are installed in my system?
The memory controller will run the kit at 5600 MT/s with CL46 latency at 1.1V, delivering the standard bandwidth and timing the motherboard is validated for without manual tuning.
The kit uses the 288-pin DDR5 UDIMM interface — what does that cap in practice?
The 288-pin unbuffered DDR5 form factor fits only desktop DDR5 slots, is limited to non-ECC operation, and runs at the board's validated 5600 MT/s ceiling for this configuration.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
