SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501831BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB DDR4 2666 ECC RDIMM CL19 1.2V Synology SA3400 memory upgrade
16 GB DDR4 2666 MHz ECC registered DIMM validated for Synology SA3400 NAS
- Capacity16GB
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 ECC RDIMM boosts Synology SA3400 capacity
- Registered 1Rx4 design with CL19 latency keeps data integrity high
- 2666 MHz PC4-21300 speed matches system spec for stable throughput
- 2 V low-voltage operation reduces power draw in NAS chassis
- 288-pin DDR4 form factor fits SA3400 slots for tool-free install
Synology SA3400 DDR4 ECC RDIMM
This 16 GB registered DDR4 module is validated for the Synology SA3400 NAS. It adds ECC protection and registered buffering to maintain data integrity in multi-user storage workloads. The single-rank 1Rx4 organisation fits one 288-pin slot without mixing ranks.
Sustained load behaviour
ECC corrects single-bit errors on the fly while the register reduces electrical load on the memory controller during continuous operation. CL19 latency at 2666 MT/s delivers steady throughput for file services, virtualization and backup tasks that run for hours rather than seconds.
Build and daily implications
The module ships without a heat spreader, relying on the NAS chassis airflow for cooling. Major OEM DRAM from Samsung, Micron or Hynix is stress-tested before dispatch. Installation follows the standard DIMM sequence in the SA3400 service manual.
주요 특징
- 16 GB DDR4 ECC RDIMM boosts Synology SA3400 capacity
- Registered 1Rx4 design with CL19 latency keeps data integrity high
- 2666 MHz PC4-21300 speed matches system spec for stable throughput
- 2 V low-voltage operation reduces power draw in NAS chassis
- 288-pin DDR4 form factor fits SA3400 slots for tool-free install
사양
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2666MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR21300-614K1 |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2666MHZ PC4-21300 1Rx4 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory |
이 상품에 대한 질문
Does the 1.2 V registered DDR4 module run hot or loud under continuous load in the SA3400?
Registered ECC RDIMMs operate at standard DDR4 voltage with no moving parts, so heat output is low and there is no fan noise in a populated NAS chassis.
What must the Synology SA3400 already have for this 16 GB RDIMM to work?
The SA3400 needs an available 288-pin DDR4 DIMM slot and a BIOS that supports registered ECC memory at 2666 MT/s.
Will this CL19 2666 MHz stick work alongside the original SA3400 memory?
Yes, it matches the SA3400's native DDR4 2666 registered ECC specification, so mixed ranks and capacities are supported per Synology's memory rules.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
