SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501272BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB DDR4 2933 PC4-23400 CL21 2Rx8 ECC RDIMM memory upgrade
16 GB DDR4 2933 ECC registered DIMM with CL21 latency for server upgrades
- Capacity16GB
- SpeedDDR4 2933 (PC4 23400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB DDR4 2933 server memory boosts capacity
- ECC registered design protects data integrity under load
- CL21 latency at 1.20V balances speed and efficiency
- 2Rx8 288-pin RDIMM fits compatible Hynix systems
- Major OEM chips ensure enterprise-grade reliability
16 GB DDR4 ECC RDIMM for servers
This 16 GB DDR4 2933 MT/s module is a 2Rx8 registered DIMM with ECC and a CL21 latency. It runs at 1.2 V on a 288-pin interface and is built from major OEM chips for Hynix-compatible platforms.
Suited for ECC server upgrades.
The module targets IT professionals upgrading Hynix-compatible servers or workstations that require registered ECC memory. Systems that accept only unbuffered non-ECC DIMMs cannot use this stick.
Verify registered ECC support and slot count
Before ordering, confirm the motherboard supports DDR4 registered ECC RDIMMs at 2933 MT/s and has a free 288-pin slot. Check the system manual for maximum capacity per slot and population rules.
주요 특징
- 16GB DDR4 2933 server memory boosts capacity
- ECC registered design protects data integrity under load
- CL21 latency at 1.20V balances speed and efficiency
- 2Rx8 288-pin RDIMM fits compatible Hynix systems
- Major OEM chips ensure enterprise-grade reliability
사양
| Brand | NEMIX RAM |
|---|---|
| Series | Hynix Server/Workstaion Compatible Series Memory |
| Model | Hynix DDR4 2933MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR23400-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Hynix |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory |
이 상품에 대한 질문
Does my server motherboard need a 288-pin DDR4 RDIMM slot to accept this 16GB module?
Yes, this module uses the 288-pin DDR4 RDIMM form factor and requires a compatible registered DIMM slot on the motherboard.
Can I mix this 2Rx8 CL21 registered ECC module with existing 1Rx8 unbuffered DIMMs in the same system?
No, registered ECC RDIMMs cannot be mixed with unbuffered UDIMMs; the memory controller requires all installed modules to share the same registered architecture.
How do I confirm the module is running at 2933 MT/s with CL21 timings after installation?
Enter the system BIOS or use a hardware information utility to verify the detected speed shows 2933 MT/s and the CAS latency reads CL21.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
