BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278929BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 1.2V 2Rx8 288-Pin UDIMM SuperMicro memory upgrade
16 GB DDR4 UDIMM running at 3200 MT/s with CL22 latency for SuperMicro systems
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 3200 boosts system responsiveness
- CL22 latency and 1.2 V operation keep power draw low
- 2Rx8 dual-rank layout maximises memory bandwidth per slot
- 288-pin UDIMM form factor fits Supermicro desktop and workstation boards
- Major OEM Samsung, Micron or Hynix chips ensure proven reliability
NEMIX RAM 16GB DDR4 3200 for SuperMicro
This 16GB DDR4 3200 module is built for SuperMicro desktop PCs and workstations that need a straightforward memory upgrade. It runs at 1.2V with CL22 latency in a single 288-pin UDIMM format. The non-ECC unbuffered design matches the original SuperMicro MEM-DR416L-SL01-UN32 specification for direct compatibility. Buyers who need ECC registered memory or a different DDR generation should look elsewhere.
Thermals noise and power draw
Operating at the standard 1.2V DDR4 voltage keeps power draw low and heat output minimal during normal desktop workloads. The module has no heat spreader, relying on case airflow for passive cooling which produces no fan noise of its own. This makes it suitable for quiet office or workstation builds where acoustic profile matters. Systems with restricted airflow may see higher temperatures under sustained load.
What the bundle changes
The package contains only the single 16GB UDIMM module with no extra cables, software or mounting hardware. Installation is a direct plug-in upgrade that typically takes minutes by following the system manual. No driver installation or configuration utility is required because the JEDEC standard profile is recognised automatically by the motherboard. The lifetime replacement warranty from NEMIX RAM covers the module itself.
주요 특징
- 16 GB DDR4 3200 boosts system responsiveness
- CL22 latency and 1.2 V operation keep power draw low
- 2Rx8 dual-rank layout maximises memory bandwidth per slot
- 288-pin UDIMM form factor fits Supermicro desktop and workstation boards
- Major OEM Samsung, Micron or Hynix chips ensure proven reliability
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM |
이 상품에 대한 질문
How do I install this 288-pin DDR4 UDIMM in my Supermicro system, and what step is often missed?
Align the notch on the module with the key in the slot, press down firmly until both side clips click shut, then verify the system detects 16GB at 3200MHz in BIOS — many forget to seat both ends evenly.
What maintenance or replacement will this 1.20V 2Rx8 module need over time?
No scheduled maintenance is required; the module has no heat spreader or moving parts, so only a future capacity upgrade or a rare failure covered by the lifetime replacement warranty would prompt removal.
What limit appears first when this CL22 3200MHz kit runs sustained workloads?
The fixed CAS latency of 22 cycles at 3200MHz sets the response floor; without a heat spreader, thermal throttling may occur before bandwidth saturates under continuous heavy load.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
