BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00280128BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB DDR5 4800 CL40 1.1V 288-Pin UDIMM SuperMicro MD38400-618K1
A 16 GB DDR5 module running at 4800 MT/s with CL40 latency and 1.1 V operation for Supermicro systems
- Capacity16GB
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 16 GB DDR5 capacity for demanding workloads
- 4800 MT/s speed with CL40 latency for responsive performance
- 1 V operating voltage for efficient power use
- 288-pin UDIMM form factor fits Supermicro systems
- Major OEM Samsung Micron Hynix chips ensure reliability
SuperMicro Compatible DDR5 UDIMM
This 16GB DDR5 module is built for SuperMicro desktop and workstation platforms that accept non-ECC unbuffered memory. It targets system builders and IT professionals who need a direct replacement validated for those specific boards. The single-rank 1Rx8 organisation keeps the memory controller load light. Buyers requiring ECC protection or registered DIMMs should look elsewhere.
1.1 V 288-Pin DDR5 4800 single module
The stick plugs into a standard 288-pin DDR5 UDIMM slot and runs at the JEDEC 4800 MT/s rate with 1.10 V. No heat spreader is fitted, so airflow from the chassis fans must reach the DRAM packages directly. One module populates a single channel; adding a second identical stick enables dual-channel bandwidth if the motherboard supports it. Systems locked to lower DDR5 speeds will down-clock automatically.
CL40 latency under sustained workloads
CAS latency of 40 cycles at 4800 MT/s delivers predictable access times during long compute sessions such as rendering, compilation or database indexing. The major-brand Samsung, Micron or Hynix die selection is stress-tested under load to maintain stability without thermal throttling. Continuous operation at the rated voltage and frequency is the design target rather than short burst overclocking headroom.
주요 특징
- 16 GB DDR5 capacity for demanding workloads
- 4800 MT/s speed with CL40 latency for responsive performance
- 1 V operating voltage for efficient power use
- 288-pin UDIMM form factor fits Supermicro systems
- Major OEM Samsung Micron Hynix chips ensure reliability
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-618K1 |
| Capacity | 16GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM |
이 상품에 대한 질문
How does the CL40 latency affect real-world responsiveness under sustained workloads?
CL40 is the rated CAS latency at 4800 MT/s; it determines the minimum cycle delay for each column access, so sustained throughput will reflect this timing.
What thermal behaviour should I expect when the module runs continuously at 1.10 V?
The stick has no heat spreader and operates at the standard 1.10 V DDR5 voltage, so case airflow alone must dissipate the heat generated during all-day operation.
Which motherboard slot and chipset combination is required for this 288-pin UDIMM to function?
A desktop or workstation board with a DDR5-compatible 288-pin UDIMM slot and a chipset that supports non-ECC unbuffered DDR5 at 4800 MT/s is needed.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
