SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00499261BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB DDR5 5600 CL46 1Rx8 1.1V UDIMM Dell Pro Max Micro
A 16 GB DDR5 module running at 5600 MHz with CL46 latency and 1.1 V operation, built for the Dell Pro Max Micro desktop
- Capacity16GB
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 16 GB DDR5 5600 boosts system speed
- CL46 latency keeps data flow responsive
- 1 V operation reduces power draw
- 288-pin UDIMM fits Dell Pro Max Micro
- single 16 GB module simplifies upgrade
Dell Pro Max Micro memory upgrade
This 16 GB DDR5 module is built specifically for the Dell Pro Max Micro desktop. It delivers a single 16 GB stick at 5600 MHz with CL46 latency and 1.1 V operation. The unbuffered, non-ECC design matches the platform's standard memory controller.
Replacing slower or smaller DDR5
The jump is worth it when the system ships with a lower-capacity stick or a slower DDR5 speed grade. Moving to 16 GB at 5600 MHz removes a memory bottleneck for multitasking and keeps the memory subsystem in step with the processor's rated data rate. It does not address builds that need ECC, registered modules, or capacities beyond a single 16 GB UDIMM.
Fits the factory slot directly
The 288-pin UDIMM drops into the existing DDR5 slot without adapters or voltage changes. One module leaves any second slot free for a future matched pair. The lack of a heat spreader keeps the profile low for the Micro chassis. No extra power connectors, BIOS toggles, or cooling clearance are required beyond what the desktop already provides.
주요 특징
- 16 GB DDR5 5600 boosts system speed
- CL46 latency keeps data flow responsive
- 1 V operation reduces power draw
- 288-pin UDIMM fits Dell Pro Max Micro
- single 16 GB module simplifies upgrade
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K1 |
| Capacity | 16GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM |
이 상품에 대한 질문
Will the 288-pin DDR5 UDIMM fit the Dell Pro Max Micro motherboard slots?
The module is a standard 288-pin DDR5 UDIMM built to JEDEC dimensions, so it seats in the desktop DDR5 slots used by the Dell Pro Max Micro.
What is the correct way to seat the module and which step do people often miss?
Align the notch with the slot key, press down firmly until both retention clips click shut, and verify the clips are fully engaged — the step most often missed is confirming both clips have locked.
Does the 1.10V CL46 1Rx8 module need any firmware update or periodic re-seating later?
No firmware update is required; the module runs at standard 1.10V JEDEC settings and, once the retention clips are latched, it does not need re-seating under normal use.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
