SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501555BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB DDR5 5600 CL46 1Rx8 ECC RDIMM Supermicro H13SSH memory upgrade
16 GB DDR5 5600 RDIMM with ECC and registered buffering for Supermicro H13SSH servers
- Capacity16GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- Exact DDR5-5600 ECC RDIMM match ensures full-speed recognition on Supermicro H13SSH
- 1Rx8 registered architecture enables stable fully-populated slots at 16GB capacity
- ECC corrects single-bit errors on the fly preventing silent data corruption
- 10V operation at CL46 timing matches controller expectations for reliable operation
- 288-pin RDIMM form factor fits H13SSH motherboard slots without compatibility issues
Exact-Match DDR5-5600 ECC RDIMM
This 16 GB DDR5 5600 CL46 registered ECC module is built for the Supermicro H13SSH motherboard. It delivers the precise 1Rx8 rank, 1.1 V voltage and 288-pin RDIMM form factor the board's memory controller expects for full-capacity recognition at rated speed.
Replaces non-ECC or mismatched DDR5 DIMMs
Swapping out unbuffered or slower DDR5 sticks removes the risk of silent data corruption and prevents the memory controller from down-clocking populated slots. The jump is worth it when uptime and data integrity matter more than raw bandwidth in a single-threaded workload.
Tool-free slot installation
Align the key notch, press until the latches click, then verify the BIOS reports 5600 MT/s and ECC active. The usual pitfall is ignoring the H13SSH manual's slot-filling sequence, which can leave the module unrecognised or force a fallback speed.
주요 특징
- Exact DDR5-5600 ECC RDIMM match ensures full-speed recognition on Supermicro H13SSH
- 1Rx8 registered architecture enables stable fully-populated slots at 16GB capacity
- ECC corrects single-bit errors on the fly preventing silent data corruption
- 10V operation at CL46 timing matches controller expectations for reliable operation
- 288-pin RDIMM form factor fits H13SSH motherboard slots without compatibility issues
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Does this 288-pin RDIMM fit the Supermicro H13SSH motherboard slots?
Yes, the module uses the 288-pin DDR5 RDIMM form factor required by the H13SSH and matches the board's registered memory specification.
What BIOS setting or population rule is often missed when installing this 1Rx8 module?
Follow the motherboard manual's DIMM population order; registered ECC modules must populate the approved slots in the correct sequence for full 16GB recognition at DDR5 5600.
Will the ECC function on this CL46 1.10V module require reconfiguration over time?
No, on-die ECC operates automatically; the registered buffer and error correction need no periodic reconfiguration or firmware updates.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
