BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278214BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB DDR5 6400 ECC RDIMM CL52 1.1V 1Rx8 Supermicro H13SST-G memory upgrade
16 GB DDR5 6400 registered ECC RDIMM validated for the Supermicro H13SST-G motherboard
- Capacity16GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-match DDR5-6400 1Rx8 RDIMM runs at full rated speed
- Registered ECC architecture prevents silent data corruption
- 1 V operation matches server memory controller spec
- Validated for Supermicro H13SST-G motherboard
- Lifetime replacement warranty with US-based tech support
Supermicro H13SST-G DDR5 RDIMM upgrade
This 16 GB DDR5-6400 registered ECC module is built to the exact rank, voltage and timing the Supermicro H13SST-G motherboard expects. It installs as a 288-pin RDIMM and runs at PC5-51200 speed with CL52 latency at 1.10 V. The registered design lets every supported slot run fully populated at rated capacity while ECC corrects single-bit errors on the fly.
Suits servers needing registered ECC.
This module fits Supermicro H13SST-G systems that require registered DDR5 RDIMMs with ECC. Builders whose boards accept only unbuffered UDIMMs or laptop-style SODIMMs cannot use it. The single-rank 1Rx8 organisation matches the board's population rules, so it works in configurations that demand that specific layout.
Registered DDR5 ECC RDIMM at 6400 MT/s
The decisive spec is the registered DDR5 ECC RDIMM interface running at 6400 MT/s with CL52 timing at 1.10 V. Only motherboards wired for 288-pin registered DDR5 ECC modules can accept this part; UDIMM-only or SODIMM-only platforms will not recognise it. Verify your system manual for approved capacities and slot population order before purchase.
주요 특징
- Exact-match DDR5-6400 1Rx8 RDIMM runs at full rated speed
- Registered ECC architecture prevents silent data corruption
- 1 V operation matches server memory controller spec
- Validated for Supermicro H13SST-G motherboard
- Lifetime replacement warranty with US-based tech support
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Will this 16 GB DDR5 6400 RDIMM work in my Supermicro H13SST-G motherboard?
Yes, it is spec-matched for the H13SST-G. The board requires 288-pin Registered DDR5 ECC modules; this kit meets the exact rank, voltage, and timing the memory controller expects.
Can I mix this 1Rx8 CL52 module with existing DDR5 RDIMMs of different rank or speed?
Mixing ranks or speeds forces the controller to run all slots at the lowest common settings. For full 6400 MT/s performance and stability, populate remaining slots with identical 1Rx8 CL52 1.10 V modules.
How do I confirm the module is running at 6400 MT/s with ECC active after installation?
Enter the BIOS or use a tool like dmidecode on Linux. Verify the reported speed shows 6400 MT/s (PC5-51200), the voltage reads 1.10 V, and ECC status is reported as enabled or active.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
