SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502024BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB DDR5 6400MHz CL52 1Rx8 1.1V ECC Registered RDIMM memory upgrade
16 GB DDR5 6400 MHz CL52 1Rx8 1.1 V ECC Registered RDIMM validated for Supermicro H13SVW-N
- Capacity16GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact DDR5-6400 CL52 1.10V spec recognised at full speed by the server memory controller
- 1Rx8 registered ECC design offloads the controller and corrects single-bit errors on the fly
- 288-pin RDIMM form factor matches the Supermicro H13SVW-N motherboard slot requirements
- Built with major OEM Samsung Micron Hynix chips for enterprise-grade stability
- Lifetime replacement warranty and free US-based technical support included
Exact DDR5-6400 ECC RDIMM for Supermicro H13SVW-N
This 16 GB DDR5 module runs at 6400 MT/s with CL52 latency and 1.1 V operation. It uses a 288-pin Registered RDIMM form factor with 1Rx8 organisation and on-die ECC. The part is validated for the Supermicro H13SVW-N motherboard and delivers the exact rank, voltage and timing the platform expects.
Suited for single-module capacity expansion
Administrators adding memory to a Supermicro H13SVW-N system can install this kit with confidence that the memory controller will recognise the full 16 GB at rated speed. Builders using consumer UDIMM or SODIMM slots, or boards that require unbuffered memory, cannot use this registered module.
Registered architecture and ECC decide fit
The registered buffer offloads the memory controller so every populated slot runs at full capacity, while ECC corrects single-bit errors before they reach production workloads. If your motherboard calls for unbuffered UDIMMs or lacks RDIMM support, this module will not function.
주요 특징
- Exact DDR5-6400 CL52 1.10V spec recognised at full speed by the server memory controller
- 1Rx8 registered ECC design offloads the controller and corrects single-bit errors on the fly
- 288-pin RDIMM form factor matches the Supermicro H13SVW-N motherboard slot requirements
- Built with major OEM Samsung Micron Hynix chips for enterprise-grade stability
- Lifetime replacement warranty and free US-based technical support included
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Will this 16GB DDR5 6400 RDIMM work in a Supermicro H13SVW-N motherboard alongside existing registered ECC modules?
Yes, it is an exact-match upgrade for the H13SVW-N, matching the 1Rx8 rank, 1.10V voltage, CL52 latency and 288-pin RDIMM form factor the board expects.
How can I verify the ECC and registered buffer are active after installing this DDR5 6400 module?
Enter the BIOS and confirm the memory is reported as 16GB DDR5 6400 with ECC enabled and registered operation shown for the populated slot.
What comes in the box and do I need any extra parts for installation?
The kit includes one 16GB DDR5 6400 CL52 1.10V 288-pin ECC Registered RDIMM; no additional components are required for a compatible server board.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
