SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502152BTC
재고 있음
NEMIX RAM
NEMIX RAM 192GB (2x96GB) DDR5 5600 ECC Registered RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
A 192GB DDR5 kit of two 96GB registered ECC RDIMMs running at 5600MHz CL46 1.1V, validated for the Supermicro H14SST-G motherboard
- Capacity192GB (2 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 192 GB capacity with two 96 GB modules for dense server workloads
- DDR5 5600 speed rated at PC5-44800 for high throughput
- CL46 latency and 1.1 V operation tuned for efficiency
- ECC registered RDIMM design corrects errors and buffers signals
- Verified fit for Supermicro H14SST-G motherboard with 288-pin form factor
Exact-match DDR5-5600 RDIMM kit
This NEMIX RAM kit delivers 192GB of DDR5 memory as two 96GB registered ECC RDIMMs rated at 5600 MT/s with CL46 latency and 1.1V operation. The modules use a 2Rx4 organization and 288-pin form factor built with major OEM DRAM chips. They are specified for full-capacity recognition and rated-speed operation on the target platform.
For Supermicro H14SST-G server builds
This kit suits administrators upgrading a Supermicro H14SST-G motherboard that requires registered ECC DDR5 RDIMMs and supports the stated population rules. It is not for systems that accept only unbuffered UDIMMs, SODIMM form factors, or non-ECC memory. Buyers needing different capacities, speeds, or voltages should verify their board's qualified vendor list before ordering.
Verify motherboard population rules
Check the Supermicro H14SST-G manual for supported DIMM capacities per slot, approved population sequences, and any BIOS version requirements for 96GB dual-rank modules. Confirm the board's maximum total memory and channel limits match a 192GB two-module configuration. Ensure the server chassis and CPU cooler clearance accommodate standard-height RDIMMs before installation.
주요 특징
- 192 GB capacity with two 96 GB modules for dense server workloads
- DDR5 5600 speed rated at PC5-44800 for high throughput
- CL46 latency and 1.1 V operation tuned for efficiency
- ECC registered RDIMM design corrects errors and buffers signals
- Verified fit for Supermicro H14SST-G motherboard with 288-pin form factor
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K2 |
| Capacity | 192GB (2 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Do I need a Supermicro H14SST-G motherboard to use this 192GB 2x96GB DDR5 5600 RDIMM kit?
Yes, the kit is spec-matched for that motherboard's 288-pin registered DIMM slots, 1.1V operation, and memory population rules.
Can I mix these 2Rx4 CL46 modules with existing DDR5 RDIMMs of different rank or speed in the same H14SST-G system?
Mixing ranks or speeds is not recommended; the board will typically downclock all channels to the slowest module and may limit total capacity per channel.
How do I verify the 192GB kit runs at DDR5 5600 CL46 1.1V after installation?
Check BIOS or UEFI memory information for 5600 MT/s, CL46 timings, 1.1V voltage, and full 192GB reported across both sockets.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
