저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1TB DDR5 5600 CL46 16x64GB RDIMM ECC Registered memory upgrade for Supermicro H14DSG-OD

SKU CH-DY3P-SATGT

A 1 TB DDR5 kit of sixteen 64 GB registered ECC RDIMMs running at 5600 MHz CL46 1.1 V for the Supermicro H14DSG-OD motherboard

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1TB 16X64GB

구성 30개 더 보기

취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.

  • 1TB capacity with 16 matched 64GB modules for full server population
  • DDR5 5600 speed with CL46 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors and stabilises every slot
  • 1V operation at 2Rx4 rank matches controller requirements exactly
  • Verified fitment for Supermicro H14DSG-OD motherboard with 288-pin RDIMM form factor

1TB DDR5-5600 Registered ECC Kit

This 1TB kit contains sixteen 64GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.1V operation. It is built for the Supermicro H14DSG-OD motherboard and targets administrators who need maximum registered ECC capacity in every available slot.

Registered 288-pin RDIMM form factor

Each module uses a 288-pin registered DDR5 RDIMM design with a 2Rx4 organisation and no heat spreader. The registered architecture buffers address and command signals so the memory controller can drive a fully populated configuration at the rated speed, while on-die ECC corrects single-bit errors before they affect workloads.

Verify DIMM population rules before ordering

Server memory support varies by model and BIOS revision. Consult the Supermicro H14DSG-OD manual for the approved population sequence, maximum capacity per channel, and any firmware requirements so the kit is recognised at full capacity on first boot.

주요 특징

  • 1TB capacity with 16 matched 64GB modules for full server population
  • DDR5 5600 speed with CL46 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors and stabilises every slot
  • 1V operation at 2Rx4 rank matches controller requirements exactly
  • Verified fitment for Supermicro H14DSG-OD motherboard with 288-pin RDIMM form factor

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What does DDR5 5600 PC5-44800 mean for real-world bandwidth?

The kit runs at 5600 MT/s, delivering up to 44800 MB/s per module; the memory controller on the Supermicro H14DSG-OD will operate all 16 slots at this rate when populated per the board's population rules.

What physical slot and clearance does this 288-pin RDIMM kit require?

Each 64 GB module uses a standard 288-pin DDR5 RDIMM edge connector and has no heat spreader, so it fits any DDR5 RDIMM slot on the H14DSG-OD without extra height clearance.

How do I install the 16 modules in the correct population order?

Consult the H14DSG-OD manual for the exact DIMM sequence; the common mistake is filling slots sequentially instead of following the board's prescribed population order for 16 DIMMs.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.