저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM 256GB (2 x 128GB) DDR4 2933MHz PC4-23400 4Rx4 ECC LRDIMM server RAM

SKU CH-2QQW-0WJFN

256 GB DDR4 server kit with two 128 GB ECC LRDIMMs at 2933 MHz, CL21, 1.2 V, 288-pin, 4Rx4

  • Capacity256GB (2 x 128GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS Latency21
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 256 GB total capacity from two 128 GB modules for large server workloads
  • DDR4 2933 MHz PC4-23400 speed rating supports high-throughput applications
  • Load Reduced DIMM design lowers electrical load on the memory bus
  • ECC protection detects and corrects single-bit errors for data integrity
  • 2 V operating voltage reduces power draw per module

Server DDR4 256GB Kit

This 256GB kit contains two 128GB DDR4 LRDIMM modules rated at 2933MHz PC4-23400. It is built for enterprise servers that require registered ECC memory with a load-reduced design. The modules are not compatible with standard desktop or workstation motherboards that accept only unbuffered DIMMs.

Load-Reduced Interface Limits

Load-reduced DIMMs reduce electrical load on the memory bus, allowing higher per-slot capacities than standard RDIMMs. The DDR4 2933MHz interface caps transfer rates at 23400 MB/s per module, and the 288-pin form factor fits only DDR4 server slots. Systems must support 4Rx4 organisation and ECC to use this kit.

4Rx4 ECC LRDIMM Decides Fit

The 4Rx4 rank configuration and ECC LRDIMM format are the single specifications that determine whether this memory works in a given server. Motherboards that do not explicitly support 4Rx4 load-reduced modules will not post with these installed. Verify the platform qualified-vendor list before purchase.

주요 특징

  • 256 GB total capacity from two 128 GB modules for large server workloads
  • DDR4 2933 MHz PC4-23400 speed rating supports high-throughput applications
  • Load Reduced DIMM design lowers electrical load on the memory bus
  • ECC protection detects and corrects single-bit errors for data integrity
  • 2 V operating voltage reduces power draw per module

사양

BrandNEMIX RAM
ModelPart#: ML23400-744K2-SM-SYS-5019P-M
Part NumberPart#: ML23400-744K2-SM-SYS-5019P-M
Capacity256GB (2 x 128GB)
SpeedDDR4 2933 (PC4 23400)
CAS Latency21
Voltage1.2V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix

이 상품에 대한 질문

Should I choose the 256GB kit with two 128GB modules or look for a different capacity?

This kit provides 256GB total using two 128GB LRDIMMs. Each module is a 4Rx4 load-reduced design running at 1.2V, so the choice depends on how many DIMM slots your server has free and the maximum capacity per slot its memory controller supports.

What does the 2933MHz speed mean once the memory is installed in a server?

The modules are rated for DDR4 2933 (PC4-23400) with CAS latency 21. Actual operating speed will be set by the server's memory controller and the number of DIMMs populated per channel; it may run at 2933MHz or step down to a lower supported JEDEC frequency.

How does the 288-pin LRDIMM interface affect compatibility and maximum capacity?

The 288-pin DDR4 LRDIMM form factor fits server motherboards designed for load-reduced memory. The 4Rx4 organisation and ECC support allow higher densities per channel than standard RDIMMs, but the platform must explicitly support LRDIMM technology.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.