저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Four green DDR5 RDIMM modules without heat spreaders in a 256GB kit

NEMIX RAM

NEMIX RAM 256GB (4×64GB) DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM for Supermicro X14SDW-64C-SP9F

SKU CH-DQ20-668V9

256 GB DDR5-5600 registered ECC kit with four 64 GB modules at CL46 and 1.1 V, validated for the Supermicro X14SDW-64C-SP9F motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

구성 4개 더 보기
  • 256 GB capacity across four 64 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth out of the box
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-64C-SP9F without adapters

Exact-match DDR5 RDIMM kit

This NEMIX RAM kit supplies 256 GB across four 64 GB DDR5 5600 RDIMMs built to the Supermicro X14SDW-64C-SP9F memory controller specification. Registered ECC modules with 2Rx4 organisation and CL46 timing are recognised at full capacity and rated speed without manual tuning.

Practical limits of DDR5 5600 registered ECC

The DDR5 5600 standard delivers 44 800 MT/s bandwidth, yet total capacity and population order remain bound by the motherboard firmware. Registered buffering lets every slot run fully populated, while ECC corrects single-bit errors on the fly.

Build quality and daily handling

Modules ship without heat spreaders, relying on server chassis airflow for cooling. Major OEM Samsung Micron Hynix chips and 1.10 V operation keep thermals manageable in dense configurations. The 288-pin RDIMM keying prevents accidental insertion into UDIMM or SODIMM slots during maintenance.

주요 특징

  • 256 GB capacity across four 64 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth out of the box
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-64C-SP9F without adapters

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Should I choose the 256GB kit with four 64GB modules or a smaller capacity for the Supermicro X14SDW-64C-SP9F?

The 256GB kit provides four 64GB modules to fully populate the board's DDR5 RDIMM slots, delivering maximum registered ECC capacity at the rated DDR5 5600 speed.

What does the DDR5 5600 (PC5-44800) rating mean once the modules are installed in the server?

The memory controller will run each 2Rx4 registered DIMM at 5600 MT/s with CL46 latency at 1.1V, providing the full PC5-44800 bandwidth the platform expects.

How does the 288-pin registered ECC interface affect compatibility and performance limits?

The 288-pin RDIMM form factor with registered buffering and ECC is required by the Supermicro X14SDW-64C-SP9F; it enables full-capacity operation across all slots while correcting single-bit errors.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.