SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00498233BTC
재고 있음
NEMIX RAM
NEMIX RAM 256GB 4x64GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H13SSL-NT memory upgrade
A 256 GB DDR5 ECC RDIMM kit of four 64 GB modules running at 6400 MT/s with CL52 latency and 1.1 V, registered for full-capacity stability on the Supermicro H13SSL-NT motherboard
- Capacity256GB (4 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-match DDR5-6400 kit installs at rated speed with CL52 timing and 1.1 V operation
- Four 64 GB modules deliver 256 GB total capacity in a single kit
- Registered ECC RDIMM architecture corrects single-bit errors for enterprise stability
- 2Rx4 dual-rank organisation matches Supermicro H13SSL-NT memory population rules
- 288-pin DDR5 form factor fits the board's registered DIMM slots precisely
Exact-fit DDR5 server kit
This NEMIX RAM kit delivers 256GB across four 64GB DDR5 RDIMM modules rated at 6400 MT/s with CL52 latency. Registered ECC architecture and 1.1V operation match the Supermicro H13SSL-NT motherboard requirements for full-capacity recognition and stable operation.
Replaces mixed or slower DIMMs
Swapping out partial populations or lower-speed modules with this matched 4x64GB kit ensures the memory controller sees identical rank, voltage and timing across every slot. The jump is worth it when your workload demands maximum registered ECC capacity at the board's native DDR5-6400 specification.
Suits Supermicro H13SSL-NT deployments
Administrators populating all available RDIMM slots on this specific platform gain verified compatibility and enterprise-grade error correction. Builders needing UDIMM, SODIMM or non-ECC memory for other systems should look elsewhere, as this kit is purpose-built for registered DDR5 server boards only.
주요 특징
- Exact-match DDR5-6400 kit installs at rated speed with CL52 timing and 1.1 V operation
- Four 64 GB modules deliver 256 GB total capacity in a single kit
- Registered ECC RDIMM architecture corrects single-bit errors for enterprise stability
- 2Rx4 dual-rank organisation matches Supermicro H13SSL-NT memory population rules
- 288-pin DDR5 form factor fits the board's registered DIMM slots precisely
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K4 |
| Capacity | 256GB (4 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 4X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Will the 288-pin DDR5 RDIMM modules fit the Supermicro H13SSL-NT motherboard slots?
Yes, the kit uses the exact 288-pin Registered DDR5 form factor that the H13SSL-NT requires; it is not a UDIMM or SODIMM so it seats directly in the board's DDR5 RDIMM slots.
What is the correct population order for the four 64 GB 2Rx4 modules on the H13SSL-NT?
Install the modules in the sequence specified by the Supermicro H13SSL-NT manual — typically filling the primary channel slots first — so the memory controller recognises the full 256 GB at DDR5-6400 CL52.
Do these 1.1 V registered ECC RDIMMs need any firmware updates or periodic re-seating over their service life?
No firmware updates are required for the memory itself; the modules are validated for continuous operation at 1.1 V with on-die ECC, and the registered design maintains signal integrity without scheduled re-seating.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
