SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501811BTC
재고 있음
NEMIX RAM
NEMIX RAM 256GB (8x32GB) DDR5 4800 CL40 1.1V ECC RDIMM SuperMicro Server memory upgrade
A 256GB registered DDR5 kit of eight 32GB ECC modules at 4800 CL40 1.1V for SuperMicro servers
- Capacity256GB (8 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256GB total capacity across eight 32GB modules for heavy workloads
- DDR5 4800 speed with CL40 latency delivers high throughput
- ECC registered RDIMM design protects data integrity in servers
- 1V operation reduces power draw under load
- Validated for SuperMicro IoT SuperServer SYS-211SE models
256GB DDR5-4800 ECC RDIMM kit
This NEMIX RAM kit delivers 256GB across eight 32GB registered DIMMs built for Supermicro IoT SuperServer platforms. Each module runs at 4800MT/s with CL40 latency at 1.1V using 1Rx4 organisation and 288-pin DDR5 form factor.
Suited for Supermicro SYS-211SE-31D.
Administrators expanding memory on those specific Supermicro IoT SuperServer models will find the kit validated for compatibility. Builders targeting other vendors, consumer motherboards or non-ECC platforms should look elsewhere.
Registered ECC with 1Rx4 organisation
The RDIMM register and on-die ECC protect data integrity in multi-DIMM server configurations while the single-rank-per-channel layout keeps electrical loading low. Systems requiring unbuffered UDIMMs or different rank structures cannot use this memory.
주요 특징
- 256GB total capacity across eight 32GB modules for heavy workloads
- DDR5 4800 speed with CL40 latency delivers high throughput
- ECC registered RDIMM design protects data integrity in servers
- 1V operation reduces power draw under load
- Validated for SuperMicro IoT SuperServer SYS-211SE models
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-314K8 |
| Capacity | 256GB (8 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (8X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
이 상품에 대한 질문
How do I install these 288-Pin DDR5 RDIMM modules in a SuperMicro SYS-211SE server and which step is often missed?
Power down the server, open the chassis, align each module's key notch with the slot, press firmly until both retention clips click, then verify all eight modules are detected in BIOS before closing the case
What maintenance or replacement will this 256GB ECC registered kit need during its service life?
No routine maintenance is required; if a module fails the lifetime replacement warranty covers it, and ECC corrects single-bit errors transparently while logging uncorrectable ones for monitoring
What limit appears first when this CL40 1.10V memory runs sustained workloads on a SuperMicro X31SEED-F motherboard?
The CAS latency of CL40 at DDR5-4800 sets the baseline response time; under continuous load the memory controller's thermal throttling point is reached before bandwidth saturation occurs
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
