NEMIX RAM 512GB (2x256GB) DDR4 3200 CL22 8Rx4 ECC RDIMM Supermicro X12DPL-NT6/i6
- 512GB (2 x 256GB)
- 288-Pin DDR4 RDIMM
NEMIX RAM
256GB DDR4 3200MHz registered ECC RDIMM kit with 8Rx4 ranks, CL22 latency, 1.2V operation, and 288-pin form factor validated for Supermicro X12DPL-NT6 and X12DPL-i6 motherboards
Size 256GB
This 256GB DDR4 3200MHz kit is built for the Supermicro X12DPL-NT6 and X12DPL-i6 motherboards. It delivers 8Rx4 registered ECC RDIMMs at 1.2V with CL22 timing so the controller recognises full capacity at rated speed. The 288-pin form factor matches the board's population rules precisely. Buyers who need a different motherboard or a smaller capacity kit should look elsewhere.
Registered architecture offloads the memory controller so every slot runs fully populated at full capacity under continuous load. ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots during production workloads. The 1.2V operation keeps power draw consistent across all modules. This is not suited for desktop boards that require unbuffered UDIMMs.
Modules seat in standard 288-pin DDR4 RDIMM slots following the motherboard's documented population order. No heat spreader means clearance is rarely an issue in dense server chassis. The most common error is mixing registered and unbuffered DIMMs or ignoring the manual's slot sequence which prevents the system from posting at full capacity. Always verify the configuration guide before installing.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR4 ECC RDIMM Registered Server Memory |
| Part Number | MR25600-2584K1 |
| Capacity | 256GB |
| Type | 288-Pin DDR4 RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 8Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB DDR4 3200MHz PC4-25600 8Rx4 1.2V 288-PIN ECC RDIMM KIT |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Each module operates at 1.2 V, the standard DDR4 voltage, so total draw scales with the number of populated slots and the CPU memory controller load rather than the kit itself.
You need a Supermicro X12DPL-NT6 or X12DPL-i6 board with DDR4 RDIMM slots that support 8Rx4 registered ECC modules and the correct population order listed in the manual.
Mixing 8Rx4 registered ECC DIMMs with different-rank modules is not supported on the validated Supermicro platforms; the memory controller requires identical rank and ECC configuration per channel.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?