SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00500262BTC
재고 있음
NEMIX RAM
NEMIX RAM 256GB DDR5 6400 ECC RDIMM Kit 2x128GB CL52 1.1V Supermicro H13DSG-OM
256 GB DDR5 6400 ECC registered RDIMM kit, two 128 GB modules at CL52 and 1.1 V, validated for Supermicro H13DSG-OM motherboards
- Capacity256GB (2 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB total capacity from two 128 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- Registered ECC design offloads the controller and corrects single-bit errors
- 288-pin RDIMM form factor built for Supermicro H13DSG-OM motherboards
- 2Rx4 dual-rank organization enables full-population stability
Exact-Match DDR5-6400 Server Kit
This NEMIX RAM kit delivers 256GB as two 128GB DDR5 RDIMMs rated at 6400MHz PC5-51200 with CL52 latency and 1.10V operation. Registered ECC architecture with 2Rx4 organisation is built for the Supermicro H13DSG-OM motherboard.
Suited for Full-Population Server Builds
Ideal for administrators populating every slot on the H13DSG-OM with registered ECC modules that the memory controller recognises at rated speed. Not suited for systems requiring UDIMM or SODIMM form factors, non-ECC memory, or lower-density DIMMs not validated for this board.
Fits H13DSG-OM Memory Rules
The 288-pin RDIMM form factor matches the motherboard's registered DIMM requirement and population guidelines. Registered buffering reduces electrical load on the controller when all slots are filled, while ECC corrects single-bit errors to protect data integrity.
주요 특징
- 256 GB total capacity from two 128 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- Registered ECC design offloads the controller and corrects single-bit errors
- 288-pin RDIMM form factor built for Supermicro H13DSG-OM motherboards
- 2Rx4 dual-rank organization enables full-population stability
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 2X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Will this 256GB DDR5 6400 CL52 2Rx4 kit install correctly on my Supermicro H13DSG-OM motherboard?
Yes, the kit is verified for the Supermicro H13DSG-OM. It uses the 288-pin RDIMM form factor with registered architecture and 1.1V operation that the board requires.
Can I keep my existing DDR5 RDIMMs and add this 128GB per module kit to fill the remaining slots?
Only if the existing modules match DDR5 6400, CL52, 2Rx4, 1.1V registered specs. Mixed ranks or timings will force the slowest common settings or prevent boot.
How do I confirm the full 256GB is running at DDR5 6400 with ECC active after installation?
Enter BIOS to verify total capacity shows 256GB, speed reads 6400 MT/s, and ECC status is enabled. Run a memory diagnostic to validate stability.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
