BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00277553BTC
재고 있음
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 SODIMM kit POSIFLEX XT-3915-G2 JIVA Foldable 15 Terminal memory upgrade
A 32 GB DDR4 SODIMM kit running at 3200 MHz with CL22 latency, built for the POSIFLEX XT-3915-G2 JIVA Foldable 15 terminal
- Capacity32GB (2 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB total capacity across two 16 GB modules
- DDR4 3200 speed rated at PC4-25600 bandwidth
- CL22 CAS latency for responsive system operation
- 20 V low voltage reduces power draw
- 260-pin SODIMM form factor fits POSIFLEX XT-3915-G2 terminal
POSIFLEX JIVA 15 terminal memory kit
This 32 GB DDR4 SODIMM kit is built specifically for the POSIFLEX XT-3915-G2 JIVA Foldable 15 terminal. It contains two 16 GB modules that install in minutes to lift the system’s multitasking headroom for point-of-sale and kiosk workloads.
1.2 V unbuffered DDR4 thermals
Running at 1.20 V with CL22 latency, the non-ECC unbuffered modules draw minimal power and generate little heat inside the compact terminal chassis. No heat spreaders are fitted, so airflow from the system fan passes directly over the DRAM packages.
260-pin dual-rank drop-in upgrade
Each module uses a 2Rx8 organisation on a standard 260-pin DDR4 SODIMM PCB, matching the terminal’s factory slot layout exactly. The kit fills both slots for 32 GB total capacity, leaving no empty sockets and requiring no BIOS changes or additional hardware.
주요 특징
- 32 GB total capacity across two 16 GB modules
- DDR4 3200 speed rated at PC4-25600 bandwidth
- CL22 CAS latency for responsive system operation
- 20 V low voltage reduces power draw
- 260-pin SODIMM form factor fits POSIFLEX XT-3915-G2 terminal
사양
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT |
이 상품에 대한 질문
How do I install the 260-pin SODIMM modules into the POSIFLEX XT-3915-G2 and what step is often missed?
Power off the terminal, remove the bottom cover, align the notch on each 16 GB module with the slot key, press firmly until the side clips click, then replace the cover and verify 32 GB in BIOS.
What maintenance or replacement will this 32 GB DDR4 kit need during its service life?
No scheduled maintenance is required; the modules have no heat spreaders or moving parts, so only a failed stick would need replacement under the lifetime warranty.
What limit appears first when the POS terminal runs sustained workloads with this CL22 memory?
The CAS latency of 22 cycles at 3200 MT/s sets the access-speed ceiling before bandwidth or voltage becomes a bottleneck.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
