SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00497027BTC
재고 있음
NEMIX RAM
NEMIX RAM 384GB (8x48GB) DDR5 5600 ECC Registered RDIMM CL46 2Rx8 1.1V Supermicro H13SSF memory upgrade
Eight 48 GB DDR5-5600 registered ECC RDIMMs at CL46 and 1.1 V, validated for Supermicro H13SSF servers
- Capacity384GB (8 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 384 GB total capacity from eight 48 GB modules for high-density server workloads
- DDR5 5600 (PC5-44800) speed matches the Supermicro H13SSF memory controller specification
- Registered ECC RDIMM design offloads the controller and corrects single-bit errors automatically
- 2Rx8 rank structure with 1.1 V operation meets the board's population rules exactly
- 288-pin DDR5 form factor ensures correct physical and electrical fit in every slot
Exact-match upgrade kit
This NEMIX RAM kit delivers 384GB across eight 48GB DDR5 5600 registered ECC RDIMMs. It is built for administrators who need the precise rank, voltage and timing the Supermicro H13SSF memory controller expects. Each module runs at CL46 and 1.1V using 2Rx8 organisation.
Build fit and population rules
The 288-pin registered form factor matches the board's DIMM slots and supports full population without unbuffered alternatives. Registered architecture offloads the memory controller so every slot can run at rated capacity while ECC corrects single-bit errors on the fly. Consult the motherboard manual for approved population order and maximum supported capacity before installation.
Replaces smaller or mixed-capacity sets
This kit replaces partial or mismatched DDR5 RDIMM configurations that limit total memory or force reduced speeds. The jump is worth it when workloads demand the full 384GB at native DDR5 5600 throughput with registered ECC stability. It is not for systems that require unbuffered UDIMMs, SODIMMs or a different DDR generation.
주요 특징
- 384 GB total capacity from eight 48 GB modules for high-density server workloads
- DDR5 5600 (PC5-44800) speed matches the Supermicro H13SSF memory controller specification
- Registered ECC RDIMM design offloads the controller and corrects single-bit errors automatically
- 2Rx8 rank structure with 1.1 V operation meets the board's population rules exactly
- 288-pin DDR5 form factor ensures correct physical and electrical fit in every slot
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K8 |
| Capacity | 384GB (8 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 8X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Will the CL46 latency hold when all eight slots of the Supermicro H13SSF are populated?
Yes, the registered DDR5 RDIMM architecture is designed to maintain rated CL46 timing across a full 8-slot load on the H13SSF motherboard.
How much power does the 384 GB kit draw at 1.1 V during continuous operation?
The modules run at the standard DDR5 1.10 V, so total power scales with the eight 48 GB RDIMMs under sustained server workloads.
Does the H13SSF require a specific BIOS version or CPU stepping before it will recognise the 48 GB 2Rx8 RDIMMs?
The kit is validated for the Supermicro H13SSF platform; consult the motherboard manual for supported capacities, population order and any firmware requirements.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
