SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502081BTC
재고 있음
NEMIX RAM
NEMIX RAM 48GB DDR5 5600 PC5-44800 CL46 2Rx8 1.1V ECC RDIMM Supermicro H13SSF memory upgrade
A 48 GB DDR5 5600 registered ECC RDIMM built for the Supermicro H13SSF motherboard
- Capacity48GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- Exact-match 48GB DDR5-5600 CL46 2Rx8 RDIMM runs at rated speed
- Verified fitment for Supermicro H13SSF 288-pin registered slots
- Registered ECC architecture enables full-capacity population with error correction
- Major OEM Samsung, Micron, Hynix chips deliver enterprise-grade stability
- Lifetime replacement warranty with free US-based technical support
48 GB DDR5-5600 ECC RDIMM for Supermicro H13SSF
This 48 GB DDR5-5600 (PC5-44800) registered ECC module is built for the Supermicro H13SSF motherboard. It runs at 1.1 V with CL46 timing and a 2Rx8 organisation so the memory controller recognises the full capacity at rated speed. The 288-pin RDIMM form factor matches the board's registered DIMM slots exactly.
Server builders who need registered ECC memory
The module suits administrators upgrading a Supermicro H13SSF with registered ECC DDR5. It will not work in systems that require unbuffered UDIMMs, SODIMMs or a different DDR generation. Buyers who need non-ECC memory or a different pin count should look elsewhere.
Straightforward DIMM installation
Installation follows standard 288-pin RDIMM insertion into the H13SSF slots. The main risk is ignoring the motherboard's population order or maximum capacity per channel; consult the system manual for the approved sequence before seating the module.
주요 특징
- Exact-match 48GB DDR5-5600 CL46 2Rx8 RDIMM runs at rated speed
- Verified fitment for Supermicro H13SSF 288-pin registered slots
- Registered ECC architecture enables full-capacity population with error correction
- Major OEM Samsung, Micron, Hynix chips deliver enterprise-grade stability
- Lifetime replacement warranty with free US-based technical support
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K1 |
| Capacity | 48GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
What motherboard slot and DDR generation does the 48GB DDR5 5600 PC5-44800 CL46 2Rx8 1.1V ECC RDIMM require?
It requires a 288-pin DDR5 RDIMM slot on a motherboard that supports registered ECC memory.
Can I mix this registered ECC DDR5-5600 2Rx8 1.1V module with unbuffered UDIMMs already installed in my Supermicro H13SSF?
No. The H13SSF requires registered RDIMMs; mixing registered and unbuffered DIMMs will prevent the system from posting.
How do I verify the 48GB DDR5 5600 CL46 2Rx8 1.1V ECC RDIMM is running at its rated speed and ECC is active after installation?
Enter the BIOS or UEFI and confirm the memory frequency shows 5600 MT/s, CL46 timings, 1.1 V, and that ECC status reports enabled or active.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
