SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00503973BTC
재고 있음
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 SODIMM POSIFLEX XT-3815 JIVA memory upgrade
DDR3 SODIMM upgrade for POSIFLEX XT-3815 JIVA terminals, 4 GB at 1333 MHz CL9
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 4GB capacity expands POS terminal multitasking headroom
- DDR3 1333 speed matches POSIFLEX XT-3815 JIVA specification
- 35V low-voltage operation reduces terminal power draw
- 204-pin SODIMM form factor fits factory memory slot
- Major OEM chips deliver tested reliability for retail workloads
System-specific DDR3 SODIMM for POS terminals
This 4 GB DDR3 1333 module is built for the POSIFLEX XT-3815 JIVA foldable terminal. It arrives as a single 204-pin SODIMM running at PC3-10600 with CL9 latency and 2Rx8 organisation.
Suits technicians upgrading that exact terminal.
The part is validated only for the named POSIFLEX model, so it fits repair jobs or capacity increases on that hardware. Builders working on laptops, desktops, servers or any other point-of-sale platform should look elsewhere because the firmware and pin-out are tailored to this unit.
Voltage is 1.35 V low-voltage DDR3
The module operates at 1.35 V rather than the standard 1.50 V, and the terminal must support that lower voltage for stable operation. Confirm the system accepts 1.35 V DDR3 before purchase, otherwise the memory will not function correctly.
주요 특징
- 4GB capacity expands POS terminal multitasking headroom
- DDR3 1333 speed matches POSIFLEX XT-3815 JIVA specification
- 35V low-voltage operation reduces terminal power draw
- 204-pin SODIMM form factor fits factory memory slot
- Major OEM chips deliver tested reliability for retail workloads
사양
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
이 상품에 대한 질문
Does this 204-pin DDR3 SODIMM fit the POSIFLEX XT-3815 JIVA terminal?
Yes, the module is built to the 204-pin SODIMM form factor and is validated for the POSIFLEX XT-3815 JIVA foldable terminal.
What voltage setting should I check in BIOS before installing this 1.35 V DDR3 module?
The part operates at 1.35 V; confirm the system is set to that voltage rather than the standard 1.50 V to avoid instability.
Will I need to replace the module if the terminal later requires ECC memory?
This is a non-ECC unbuffered stick, so a future move to an ECC platform would require swapping to an ECC-compatible module.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
