SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00495769BTC
재고 있음
NEMIX RAM
NEMIX RAM 512GB (8×64GB) DDR5 6400 CL52 2Rx4 1.1V ECC Registered RDIMM Supermicro H14SSF memory upgrade
Eight 64 GB DDR5 6400 CL52 2Rx4 1.1 V ECC registered RDIMMs validated for the Supermicro H14SSF motherboard
- Capacity512GB (8 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 512 GB total capacity from eight 64 GB modules for maximum server density
- DDR5-6400 speed with CL52 latency delivers rated throughput without downclocking
- Registered ECC design with 2Rx4 organisation corrects single-bit errors under full load
- 10 V operation matches the motherboard's memory-controller specification exactly
- 288-pin RDIMM form factor fits the Supermicro H14SSF slot layout precisely
Exact-match DDR5 kit for Supermicro H14SSF
This 512 GB kit contains eight 64 GB DDR5 6400 RDIMMs built to the precise rank, voltage and timing the server's memory controller expects. It is intended for administrators who need to populate every slot on a compatible Supermicro H14SSF motherboard with registered ECC memory that runs at its rated speed without manual tuning.
Registered 2Rx4 ECC at 1.1 V
Each module is a 288-pin DDR5 RDIMM with CL52 latency, 1.10 V operating voltage and a 2Rx4 organisation. The registered architecture buffers address and command signals so the memory controller can drive a fully populated configuration reliably, while on-die ECC corrects single-bit errors before they affect workloads.
Eight-module population fills every slot
The kit delivers the full 512 GB capacity supported by the validated motherboard when all DIMM sockets are occupied. Adding further memory is not possible on this platform, and workloads that exceed this limit will require a different server configuration.
주요 특징
- 512 GB total capacity from eight 64 GB modules for maximum server density
- DDR5-6400 speed with CL52 latency delivers rated throughput without downclocking
- Registered ECC design with 2Rx4 organisation corrects single-bit errors under full load
- 10 V operation matches the motherboard's memory-controller specification exactly
- 288-pin RDIMM form factor fits the Supermicro H14SSF slot layout precisely
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K8 |
| Capacity | 512GB (8 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 512GB 8X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Will the DDR5-6400 speed run at 6400 MT/s once installed in my Supermicro H14SSF?
Yes, the kit is spec-matched to the H14SSF so the memory controller recognises the exact rank, voltage and timing, allowing all eight modules to operate at the rated 6400 MT/s.
Does the registered ECC RDIMM interface limit how many modules I can populate on this board?
The registered architecture offloads the memory controller, enabling every slot to be fully populated at full capacity while ECC corrects single-bit errors on the fly.
Do these 288-pin RDIMMs fit the DIMM slots on the Supermicro H14SSF motherboard?
Yes, the 288-pin registered RDIMM form factor is exactly what the H14SSF requires; they are not UDIMM or SODIMM and match the board's population rules.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
