SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00500888BTC
재고 있음
NEMIX RAM
NEMIX RAM 576GB 6x96GB DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H14SST-G memory upgrade
576 GB DDR5 5600 ECC registered server kit with six 96 GB 2Rx4 modules validated for Supermicro H14SST-G motherboards
- Capacity576GB (6 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 576 GB total capacity in a matched 6 x 96 GB kit for dense server workloads
- DDR5 5600 speed with CL46 latency delivers rated bandwidth for memory-intensive applications
- Registered ECC architecture with 2Rx4 organisation maintains data integrity at full population
- 10 V operation meets DDR5 standard voltage for efficient enterprise deployment
- Verified fit for Supermicro H14SST-G motherboard using 288-pin RDIMM form factor
Exact-match 576 GB DDR5-5600 kit for Supermicro
This 6 x 96 GB registered ECC RDIMM kit delivers 576 GB of DDR5 memory at 5600 MT/s with CL46 latency and 1.1 V operation. It is built for the Supermicro H14SST-G motherboard and uses the 288-pin RDIMM form factor that board requires.
DDR5 RDIMM population rules limit full-speed
The motherboard’s memory controller expects registered 2Rx4 modules at 1.1 V; mixing ranks, voltages or unbuffered DIMMs will prevent the kit from running at its rated 5600 MT/s. Full capacity is only guaranteed when every slot follows the board’s validated population sequence.
Verify DIMM population order
Before ordering, consult the Supermicro H14SST-G manual for approved DIMM slot order, maximum supported capacity per channel, and any BIOS version requirements. The kit will not function if the board’s population rules or capacity limits are exceeded.
주요 특징
- 576 GB total capacity in a matched 6 x 96 GB kit for dense server workloads
- DDR5 5600 speed with CL46 latency delivers rated bandwidth for memory-intensive applications
- Registered ECC architecture with 2Rx4 organisation maintains data integrity at full population
- 10 V operation meets DDR5 standard voltage for efficient enterprise deployment
- Verified fit for Supermicro H14SST-G motherboard using 288-pin RDIMM form factor
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K6 |
| Capacity | 576GB (6 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 6X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Should I choose the 576GB kit of six 96GB modules or a smaller capacity for my Supermicro H14SST-G?
The 576GB kit provides six 96GB DDR5 5600 RDIMMs that match the board's exact rank, voltage and timing requirements, allowing full-capacity recognition and rated speed when all slots are populated.
What does the DDR5 5600 speed rating actually deliver once the modules are installed in the server?
The memory runs at 5600 MT/s with CL46 latency at 1.1V, giving the bandwidth and timing the memory controller expects for stable, full-speed operation across all six slots.
How does the 288-pin RDIMM interface and registered ECC design affect what the system can support?
The 288-pin registered ECC RDIMM format offloads the memory controller, enabling all six slots to run fully populated at 576GB while ECC corrects single-bit errors to prevent data corruption.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
