저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Six green DDR5 RDIMM modules in a row, no heat spreaders, gold edge connectors visible

NEMIX RAM

NEMIX RAM 576GB (6x96GB) DDR5 5600 CL46 ECC RDIMM Supermicro H13SST-G memory upgrade

SKU CH-KHHC-JWDWJ

A 576GB kit of six 96GB DDR5 5600 CL46 ECC registered RDIMMs at 1.1V, validated for Supermicro H13SST-G motherboards

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

구성 24개 더 보기
  • 576 GB total capacity from six 96 GB modules for maximum memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 10 V operation matches the board's voltage requirement for stable full-population use
  • 288-pin RDIMM form factor fits the Supermicro H13SST-G motherboard's DIMM slots

Exact-match DDR5 RDIMM kit

This 576GB kit contains six 96GB DDR5 5600 CL46 ECC registered DIMMs built to the Supermicro H13SST-G memory controller specifications. Each module runs at 1.1V with a 2Rx4 organisation and fits the 288-pin RDIMM slots the board requires. The kit is supplied new and ready for installation.

Suited for fully populated server builds

Administrators who need the maximum supported capacity on this motherboard will use every slot with matched rank, voltage and timing. Builders using UDIMM or SODIMM platforms cannot install these registered modules. Systems that do not support 2Rx4 DDR5 ECC RDIMMs at 5600 MT/s should choose a different kit.

Capacity and headroom

Six 96GB modules deliver 576GB total, allowing large in-memory databases, virtualisation clusters or HPC workloads to run without swapping. Registered buffering keeps the memory controller stable when all slots are filled at rated speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. Workloads exceeding 576GB or requiring higher memory speeds will need a platform that supports larger DIMMs or faster DDR5 rates.

주요 특징

  • 576 GB total capacity from six 96 GB modules for maximum memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 10 V operation matches the board's voltage requirement for stable full-population use
  • 288-pin RDIMM form factor fits the Supermicro H13SST-G motherboard's DIMM slots

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What motherboard slot type does the Supermicro H13SST-G need for this DDR5 5600 kit?

The Supermicro H13SST-G requires 288-pin DDR5 RDIMM slots; this kit uses that exact form factor.

Will my server memory controller accept 2Rx4 registered modules at 1.1V?

The kit is spec-matched to the H13SST-G population rules, so the controller recognises the 2Rx4 registered DIMMs at 1.1V and runs them at DDR5-5600.

How can I confirm the kit is running at its rated 5600 MT/s and CL46 after installation?

Check the BIOS memory information or run a tool such as dmidecode; it should report DDR5-5600 speed, CL46 latency and the full 576 GB capacity.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.