SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501458BTC
재고 있음
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 4800 CL40 ECC RDIMM Dell XE8640 memory upgrade
64GB dual-rank DDR5 ECC RDIMM kit running at 4800MHz CL40 for Dell PowerEdge XE8640 servers
- Capacity64GB (2 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB kit expands server capacity for heavy workloads
- DDR5 4800 speed delivers high bandwidth for data-intensive tasks
- ECC registered design protects data integrity in mission-critical systems
- 1 V operation reduces power draw per module
- Validated for Dell PowerEdge XE8640 rack servers
Dell PowerEdge XE8640 memory kit
This 64GB kit contains two 32GB DDR5 RDIMMs built for the Dell PowerEdge XE8640 rack server. Registered ECC operation protects data integrity in multi-socket configurations. Modules run at 1.1V with a CL40 latency profile. The kit targets administrators expanding memory capacity on qualified Dell platforms.
Sustained workload behaviour
Registered buffering and on-die ECC maintain signal quality during continuous read-write cycles typical of virtualization and database tasks. The 4800 MT/s data rate delivers steady throughput without relying on short burst speeds. Dual-rank 2Rx8 organisation supports higher density per channel under prolonged load.
CL40 latency at DDR5 4800
The CAS latency of CL40 at 4800 MT/s determines how quickly the memory controller can access each column. This timing is fixed by the module SPD and cannot be tightened without platform support. Buyers needing lower latency must verify motherboard compatibility before purchase.
주요 특징
- 64 GB kit expands server capacity for heavy workloads
- DDR5 4800 speed delivers high bandwidth for data-intensive tasks
- ECC registered design protects data integrity in mission-critical systems
- 1 V operation reduces power draw per module
- Validated for Dell PowerEdge XE8640 rack servers
사양
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
이 상품에 대한 질문
How much power does the 1.1 V DDR5 4800 RDIMM kit draw under sustained load?
Each module runs at 1.10 V; total draw depends on the Dell PowerEdge XE8640 memory controller and workload, not on the kit alone.
What must the Dell PowerEdge XE8640 already have to accept this 288-pin ECC registered kit?
The server needs free DDR5 RDIMM slots that support 2Rx8 organisation and PC5-38400 speed; the kit itself is a direct plug-in upgrade.
Will the CL40 2Rx8 modules run at 4800 MT/s if the system currently uses slower DDR5 RDIMMs?
All installed DDR5 RDIMMs operate at the lowest common speed; the kit will downclock to match the existing modules.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
