SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502603BTC
재고 있음
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 262-Pin SODIMM Memory Upgrade
64 GB DDR5 SODIMM kit with two 32 GB modules at 5600 MT/s, CL46 latency and 1.1 V operation for the ASRock IMB-X1240-WV motherboard
- Capacity64GB (2 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB capacity with two 32 GB modules for expanded multitasking
- DDR5 5600 speed rated at PC5-44800 for fast data throughput
- CL46 CAS latency tuned for responsive system operation
- 1 V low-voltage design reduces power draw and heat
- 262-pin SODIMM form factor fits the ASRock IMB-X1240-WV motherboard
Capacity and purpose
This kit provides 64 GB of DDR5 memory in two 32 GB SODIMM modules. It is built for the ASRock Industrial IMB-X1240-WV Mini-ITX motherboard and other systems that accept 262-pin DDR5 SO-DIMMs running at 5600 MT/s with CL46 latency.
Who it suits and who it does not
The modules suit builders upgrading or servicing the named ASRock board or compatible laptops that require non-ECC unbuffered DDR5 at 1.1 V. They are not for buyers who need ECC error correction, registered buffering, DIMM form-factor modules, or speeds other than 5600 MT/s.
Installation and common issues
Installation follows the usual SODIMM procedure: power off, open the memory slot, align the notch and press until the latches click. Issues usually arise when the firmware has not been updated for 2Rx8 density or when the system is limited to lower speeds or single-rank modules.
주요 특징
- 64 GB capacity with two 32 GB modules for expanded multitasking
- DDR5 5600 speed rated at PC5-44800 for fast data throughput
- CL46 CAS latency tuned for responsive system operation
- 1 V low-voltage design reduces power draw and heat
- 262-pin SODIMM form factor fits the ASRock IMB-X1240-WV motherboard
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered SODIMM Memory |
| Part Number | MS44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 64GB (2 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 262-PIN Non-ECC SODIMM KIT |
이 상품에 대한 질문
Does my ASRock IMB-X1240-WV motherboard need a specific DDR5 SODIMM slot layout for this 2x32GB kit?
The kit provides two 262-pin DDR5 SODIMMs at 5600 MT/s, CL46, 1.1 V, 2Rx8 unbuffered non-ECC — exactly the module type the IMB-X1240-WV specifies.
Can I keep my existing DDR5 4800 SODIMMs installed alongside these 5600 modules?
Mixing speeds forces all modules to run at the lowest common rate, so the 5600 kit will down-clock to 4800 and operate at the slower modules' timings.
How do I confirm the kit is running at DDR5 5600 CL46 after installation?
Open Task Manager > Performance > Memory or run CPU-Z and verify Speed reads 5600 MT/s and CAS Latency shows 46.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
