SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502069BTC
재고 있음
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 ECC RDIMM Kit memory upgrade
A 64GB quad-channel DDR5 4800 CL40 ECC registered memory kit built for Supermicro servers
- Capacity64GB (4 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity from four 16 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered RDIMM design for server error correction
- CL40 latency at 1.10 V operating voltage
- Validated for SuperMicro SuperServer SSG-521E-E1CR24H and SSG-521E-E1CR24L
DDR5 4800 ECC RDIMM Kit
This 64 GB kit contains four 16 GB registered DDR5 modules rated at 4800 MT/s with CL40 latency and 1.10 V operation. It targets administrators upgrading Supermicro Storage SuperServer SSG-521E-E1CR24H, SSG-521E-E1CR24L or X13SEDW-F platforms that require ECC RDIMM memory.
Registered DDR5 bandwidth ceiling
The PC5-38400 interface delivers a fixed 38400 MB/s theoretical peak per module at 4800 MT/s. Registered buffering adds one cycle of command latency, so real-world throughput depends on the server memory controller and population rules rather than module speed alone.
1Rx8 rank configuration decides fit
Each 16 GB module uses a single 1Rx8 rank, giving four ranks per channel when fully populated. Supermicro platforms that limit channels to fewer ranks or require 2Rx8 organisation will not accept this kit, so verify the motherboard rank limit before purchase.
주요 특징
- 64 GB total capacity from four 16 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered RDIMM design for server error correction
- CL40 latency at 1.10 V operating voltage
- Validated for SuperMicro SuperServer SSG-521E-E1CR24H and SSG-521E-E1CR24L
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
이 상품에 대한 질문
Should I pick the 4x16GB kit or a different capacity for my Supermicro server?
This kit provides 64GB total across four 16GB modules, matching the 1Rx8 rank layout validated for the Supermicro SSG-521E-E1CR24H and SSG-521E-E1CR24L storage servers.
What does the DDR5 4800 CL40 rating mean when the memory is installed?
The modules run at 4800 MT/s with CAS latency 40 at 1.1V, delivering PC5-38400 bandwidth while the registered buffer and ECC maintain data integrity under sustained server workloads.
How does the 288-pin RDIMM interface limit speed or capacity in practice?
The 288-pin DDR5 RDIMM form factor locks the kit to DDR5 slots only; the registered design allows higher capacities per channel than unbuffered DIMMs, but the memory controller caps the final operating frequency.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
