저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Four green DDR5 UDIMM modules with black chips no heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600MHz CL46 1.1V UDIMM for Supermicro X14SAZ-F

SKU CH-GR6N-WFGAH

64 GB kit of four 16 GB DDR5 5600 MHz CL46 1.1 V non-ECC UDIMM modules built for the Supermicro X14SAZ-F motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 64GB 4X16GB

  • 64 GB capacity from four 16 GB modules for expanded multitasking
  • DDR5 5600 MT/s speed with CL46 latency for responsive data access
  • 10 V operating voltage reduces power draw and heat
  • 288-pin UDIMM form factor matches Supermicro X14SAZ-F motherboard slots
  • Built with Samsung, Micron or Hynix OEM chips for tested stability

64GB DDR5 kit for Supermicro X14SAZ-F

This 64GB kit contains four 16GB DDR5 UDIMM modules rated at 5600MHz with CL46 latency. It is built for the Supermicro X14SAZ-F motherboard and uses 1.1V unbuffered non-ECC memory. The exact rank and timing match the board's memory controller expectations.

DDR5 5600 UDIMM practical limits

DDR5 5600 UDIMM modules operate at the standard JEDEC voltage of 1.1V without XMP profiles. The 288-pin unbuffered form factor fits desktop boards that accept non-ECC memory. Maximum speed and stability depend on the motherboard's qualified vendor list and BIOS revision.

64GB capacity headroom

Four populated slots deliver 64GB total, suitable for multi-tasking workloads and virtual machines. The 1Rx8 organisation keeps electrical loading low for stable operation at rated frequency. Builders needing more than 64GB or ECC error correction must choose a different platform.

주요 특징

  • 64 GB capacity from four 16 GB modules for expanded multitasking
  • DDR5 5600 MT/s speed with CL46 latency for responsive data access
  • 10 V operating voltage reduces power draw and heat
  • 288-pin UDIMM form factor matches Supermicro X14SAZ-F motherboard slots
  • Built with Samsung, Micron or Hynix OEM chips for tested stability

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Should I pick the 64GB kit with four 16GB modules or a different capacity for my Supermicro X14SAZ-F?

The kit provides 64GB total across four 16GB UDIMMs, matching the board's DDR5 5600MHz PC5-44800 spec and 1Rx8 rank layout so the memory controller recognises every module at rated speed.

What does the 5600MHz rating actually deliver once the memory is installed in the X14SAZ-F?

At 5600MHz with CL46 latency and 1.10V the modules run at the motherboard's native DDR5 5600 (PC5-44800) data rate, giving the bandwidth the platform expects without manual tuning.

How does the 288-pin DDR5 UDIMM interface limit what I can use on this motherboard?

The X14SAZ-F requires 288-pin unbuffered non-ECC DDR5 UDIMMs; this kit fits that exact slot and electrical spec, so it installs directly without needing registered or ECC modules.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.