SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501112BTC
재고 있음
NEMIX RAM
NEMIX RAM 64GB DDR5 4800 ECC RDIMM 2Rx4 CL40 1.1V THINKMATE Compatible memory upgrade
A 64GB DDR5 4800 ECC RDIMM module built for THINKMATE workstations with 2Rx4 registered chips and CL40 latency
- Capacity64GB
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB capacity expands server memory headroom for heavy workloads
- DDR5 4800 speed delivers high bandwidth for data-intensive tasks
- ECC registered design detects and corrects errors to protect data integrity
- 1 V operation reduces power draw in dense configurations
- 2Rx4 288-pin RDIMM form factor fits compatible THINKMATE workstations
64 GB DDR5 4800 ECC RDIMM for Thinkmate Workstations
This registered DDR5 module delivers 64 GB of error-correcting memory at 4800 MT/s with a CL40 latency and 1.1 V operation. It uses a 2Rx4 organisation on a 288-pin RDIMM form factor and is validated for the Thinkmate GPX-XS8-24S4-4GPU workstation.
Suited for Thinkmate GPX-XS8-24S4-4GPU memory
This module is built for the Thinkmate GPX-XS8-24S4-4GPU workstation and will not fit systems that require unbuffered UDIMMs, non-ECC memory, or a different DDR generation. Buyers needing lower capacities, different speeds, or consumer desktop compatibility should look elsewhere.
Registered ECC with 2Rx4 organisation
The single decisive specification is the registered ECC RDIMM design with 2Rx4 rank structure, which matches the Thinkmate workstation's memory controller requirements. Only platforms that explicitly support DDR5 registered ECC RDIMMs can use this module.
주요 특징
- 64 GB capacity expands server memory headroom for heavy workloads
- DDR5 4800 speed delivers high bandwidth for data-intensive tasks
- ECC registered design detects and corrects errors to protect data integrity
- 1 V operation reduces power draw in dense configurations
- 2Rx4 288-pin RDIMM form factor fits compatible THINKMATE workstations
사양
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-924K1 |
| Capacity | 64GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | THINKMATE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (1X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
이 상품에 대한 질문
Will the 288-pin DDR5 RDIMM fit the memory slots on a THINKMATE GPX-XS8-24S4-4GPU workstation?
Yes, the module uses the standard 288-pin DDR5 RDIMM form factor required by that workstation.
Do I need to configure anything in the BIOS after installing this registered ECC module, or is it detected automatically?
The workstation typically detects the 4800 MT/s CL40 timings and 1.1 V voltage automatically; just ensure the firmware is current before installation.
If a memory error appears years later, does the module itself need replacement or can the system correct it?
ECC corrects single-bit errors on the fly, but persistent multi-bit failures mean the 64 GB module must be replaced.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
