SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.0050133BTC
재고 있음
NEMIX RAM
NEMIX RAM 768GB 8x96GB DDR5 5600 CL46 1.1V 2Rx4 ECC RDIMM Supermicro H13SSH-E memory upgrade
768 GB kit of eight 96 GB DDR5 5600 CL46 2Rx4 registered ECC RDIMMs at 1.1 V, validated for Supermicro H13SSH-E motherboards
- Capacity768GB (8 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 768 GB total capacity from eight 96 GB modules for maximum server density
- DDR5-5600 speed with CL46 latency matched to the Supermicro H13SSH-E memory controller
- Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
- 1 V operation at 2Rx4 rank exactly as the motherboard specifies
- 288-pin DDR5 form factor verified for full-population stability on the H13SSH-E
Capacity and Compatibility
This 768GB kit contains eight 96GB DDR5 RDIMM modules rated at 5600MHz with CL46 latency and 1.1V operation. It is built specifically for the Supermicro H13SSH-E motherboard and uses registered ECC technology with a 2Rx4 rank structure for full-capacity recognition.
Suited For And Not For
The kit suits administrators expanding a Supermicro H13SSH-E server to its maximum supported memory population with registered ECC modules. It is not for systems that require unbuffered UDIMM or SODIMM form factors, nor for platforms that cannot accept 2Rx4 registered DIMMs at this voltage and speed.
Pre-Installation Checks
Verify the motherboard manual for approved DIMM population order and maximum capacity per slot before installation. Confirm the server BIOS revision supports this module density and that the memory controller can initialise all eight slots at the rated 5600MHz speed.
주요 특징
- 768 GB total capacity from eight 96 GB modules for maximum server density
- DDR5-5600 speed with CL46 latency matched to the Supermicro H13SSH-E memory controller
- Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
- 1 V operation at 2Rx4 rank exactly as the motherboard specifies
- 288-pin DDR5 form factor verified for full-population stability on the H13SSH-E
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K8 |
| Capacity | 768GB (8 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 768GB 8X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Does this kit require the Supermicro H13SSH-E motherboard to have all eight DDR5 slots available for installation?
Yes, the kit contains eight 96GB modules totalling 768GB, so every one of the board's eight 288-pin DDR5 RDIMM slots must be free to accommodate the full set.
Can I add this 2Rx4 registered ECC DDR5 kit alongside any existing DDR5 RDIMMs already installed in the server?
Mixing ranks or capacities is not recommended; the H13SSH-E memory controller expects identical 2Rx4 modules in every populated channel to run at the rated 5600 MT/s with CL46 timing.
How can I confirm the memory is operating at the specified 5600 MT/s and CL46 after installation?
Enter the system BIOS or UEFI and verify the memory frequency reads 5600 MT/s (PC5-44800) with CAS latency 46, and that all 768GB are detected without errors.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
